K814P

$0.72

Description：OPTOISOLATOR 5KV 1CH TRANS 4-DIP
Series：-
Mfr：Vishay Semiconductor Opto Division
Package：Tube

SKU:a5966faa824b Category: Transistor, Photovoltaic Output Optoisolators Brand: Vishay Semiconductor Opto Division

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

K814P is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Vishay Semiconductor Opto Division. Its product description is OPTOISOLATOR 5KV 1CH TRANS 4-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for K814P

Description：OPTOISOLATOR 5KV 1CH TRANS 4-DIP
Series：-
Mfr：Vishay Semiconductor Opto Division
Package：Tube
Number of Channels：1
Voltage - Isolation：5000Vrms
Current Transfer Ratio (Min)：20% @ 5mA
Current Transfer Ratio (Max)：300% @ 5mA
Turn On / Turn Off Time (Typ)：6µs, 5µs
Rise / Fall Time (Typ)：3µs, 4.7µs
Input Type：AC, DC
Output Type：Transistor
Voltage - Output (Max)：70V
Current - Output / Channel：50mA
Voltage - Forward (Vf) (Typ)：1.25V
Current - DC Forward (If) (Max)：60 mA
Vce Saturation (Max)：300mV
Operating Temperature：-40°C ~ 100°C
Mounting Type：Through Hole
Package / Case：4-DIP (0.300", 7.62mm)
Supplier Device Package：4-DIP

Transistor, Photovoltaic Output Optoisolators datasheet and documents for K814P

K814P

Transistor, Photovoltaic Output Optoisolators Overview

The K814P is a single-channel optocoupler featuring an NPN phototransistor output optically coupled to two gallium arsenide infrared emitting diodes with reverse polarity protection. It provides high isolation voltage of 5000Vrms and low coupling capacitance of typical 0.3 pF. The device offers a minimum current transfer ratio of 20% and supports endstackable 2.54 mm spacing in a 4-pin DIP package.

Transistor, Photovoltaic Output Optoisolators Feature Summary

High isolation voltage capability of 5000Vrms for robust DC isolation
Dual infrared emitting diodes with reverse polarity configuration enhance input reliability
Low coupling capacitance minimizes signal interference between input and output circuits

Transistor, Photovoltaic Output Optoisolators Applications

AC input detection circuits
General purpose digital isolation
Microprocessor system interface isolation

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify component authenticity through authorized Vishay distributors. Confirm package type matches 4-DIP specifications. Check datasheet revisions for parameter updates. Ensure storage conditions comply with moisture sensitivity levels. Validate supplier documentation against official Vishay part number records before purchase.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when high isolation voltage and low coupling capacitance are required. Consider the dual-diode input structure for improved reverse polarity tolerance. Evaluate the 20% minimum CTR against circuit gain requirements. Verify mechanical compatibility with 2.54 mm endstackable spacing constraints.

Transistor, Photovoltaic Output Optoisolators Part Context

The K814P belongs to Vishay's K814P/K824P/K844P family of optocouplers. These devices share similar phototransistor output characteristics but differ in pin configurations and channel counts. The K814P specifically represents the single-channel variant designed for compact isolation applications requiring reliable AC input handling.