MAX365CPE+

$9.63

Description：IC ANALOG SW SPST NO QUAD 16DIP
Series：-

SKU:0bfee6ea0e50 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX365CPE+ is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC ANALOG SW SPST NO QUAD 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX365CPE+

Description：IC ANALOG SW SPST NO QUAD 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：SPST - NO
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：85Ohm
Channel-to-Channel Matching (ΔRon)：2Ohm (Max)
Voltage - Supply, Single (V+)：10V ~ 30V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：250ns, 170ns
-3db Bandwidth：-
Charge Injection：5pC
Channel Capacitance (CS(off), CD(off))：4pF, 4pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-100dB @ 1MHz
Operating Temperature：0°C ~ 70°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：4
Grade：-
Qualification：-

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX365CPE+

MAX365CPE+

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX365CPE+ is a precision, quad, single-pole single-throw (SPST) analog switch featuring four normally open channels. It utilizes a 44V silicon-gate process to ensure low channel on-resistance of less than 85Ω and extremely low charge injection of 10pC. The device supports single positive supply operation from +10V to +30V or split supplies ranging from ±4.5V to ±20V. Key electrical characteristics include leakage current below 500pA at +25°C and fast switching times with turn-on under 250ns and turn-off under 170ns. It maintains CMOS-logic input compatibility while offering rail-to-rail analog signal handling capability.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Low on-resistance guaranteed to match within 2Ω between channels
Rail-to-rail analog signal handling capability enabled by 44V breakdown voltage
Extremely low charge injection for high-fidelity signal integrity
CMOS-logic input compatibility with reduced input loading

Analog Switches, Multiplexers, Demultiplexers Applications

Sample-and-Hold Circuits
Communication Systems
Guidance and Control Systems
Test Equipment

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the component against official Analog Devices/Maxim Integrated datasheets to confirm pinout alignment and package specifications. Ensure that the operating environment remains within the specified temperature range of 0°C to +70°C for this specific suffix. Cross-reference ordering information to validate the plastic DIP configuration matches the intended board layout requirements.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select the MAX365CPE+ when normally open switch logic is required for signal routing applications. Consider the bipolar supply flexibility if negative voltage rails are available in the system design. Evaluate the on-resistance flatness requirements against the typical operating characteristics graphs to ensure signal fidelity meets the application's dynamic range needs.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the MAX364/MAX365 family of precision analog switches manufactured by Maxim Integrated, now part of Analog Devices. The MAX365 variant specifically provides four normally open switches, contrasting with the MAX364's normally closed configuration. Both share identical electrical performance metrics and fabrication processes, differing only in their default logical state when unpowered or inactive.