MAX4528EPA

$1.26

Description：IC SWITCH SPDT X 2 110OHM 8DIP
Series：-

SKU:fd9cf3bc788c Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4528EPA is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH SPDT X 2 110OHM 8DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4528EPA

Description：IC SWITCH SPDT X 2 110OHM 8DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube,Tube
Switch Circuit：SPDT
Multiplexer/Demultiplexer Circuit：2:01
On-State Resistance (Max)：110Ohm
Channel-to-Channel Matching (ΔRon)：3Ohm
Voltage - Supply, Single (V+)：2.7V ~ 12V
Voltage - Supply, Dual (V±)：±2.7V ~ 6V
Switch Time (Ton, Toff) (Max)：-
-3db Bandwidth：-
Charge Injection：1pC
Channel Capacitance (CS(off), CD(off))：13pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Through Hole
Package / Case：8-DIP (0.300", 7.62mm)
Supplier Device Package：8-PDIP
Number of Circuits：2

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4528EPA

MAX4528EPA

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4528EPA is a low-voltage CMOS analog switch configured as a phase-reversal bridge. It operates from +2.7V to +12V single supply or ±2.7V to ±6V dual supplies. The device features a maximum on-resistance of 110Ω with a match of 7Ω and handles rail-to-rail signals. Leakage current is 0.5nA at +25°C. Logic thresholds are 0.8V to 2.4V for TTL/CMOS compatibility. Transition time is 100ns, charge injection is 5pC, and isolation is -68dB. Operating temperature range is -40°C to +85°C in an 8-pin PDIP package.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Phase-reversal bridge configuration for signal polarity control
Rail-to-rail analog signal handling capability
TTL and CMOS logic input compatibility

Analog Switches, Multiplexers, Demultiplexers Applications

Chopper-stabilized amplifiers
Balanced modulators and demodulators
Data acquisition systems
Test equipment
Audio-signal routing

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'EPA' confirms the extended temperature range (-40°C to +85°C) and plastic DIP-8 packaging. Confirm RoHS compliance status for the exact revision. Check manufacturer documentation for obsolescence notices or lifecycle changes before finalizing procurement plans.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when DC and low-frequency phase reversal is required. Ensure supply voltage stays within ±6V for dual or 12V for single configurations. Verify that the 110Ω on-resistance meets circuit requirements. Consider thermal derating if operating near the upper temperature limit.

Analog Switches, Multiplexers, Demultiplexers Part Context

The MAX4528 is part of Maxim Integrated's low-voltage analog switch family. It provides a compact solution for balanced signal processing. The device integrates two normally open and two normally closed switches into a single bridge structure. This design simplifies board layout compared to discrete implementations.