MAX4552CPE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4552CPE is a quad, low-voltage, single-pole/single-throw (SPST) analog switch manufactured by Analog Devices Inc./Maxim Integrated. It features four normally open (NO) switches with ±15kV electrostatic discharge (ESD) protection per IEC 1000-4-2. The device operates on dual supplies ranging from ±2V to ±6V or a single supply between +2V and +12V. Key electrical parameters include an on-resistance of up to 120Ω at ±5V supplies, matched within 8Ω, and flatness of 8Ω max over the signal range. Off-leakage current is typically 1nA at +25°C. The IC is housed in a 16-pin Plastic DIP package and supports TTL/CMOS logic compatibility.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

• Provides ±15kV ESD protection on NC/NO pins using internal bidirectional SCRs without latchup.
• Handles Rail-to-Rail analog signals across the full supply voltage range.
• Features low power consumption with supply currents under 1µA.
• Ensures TTL/CMOS logic compatibility with defined input thresholds.

Analog Switches, Multiplexers, Demultiplexers Applications

• Battery-operated equipment
• Data acquisition systems
• Test equipment
• Avionics signal routing
• Audio signal routing

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific ordering suffix 'CPE' corresponds to the 16-pin Plastic DIP package and the commercial temperature range of 0°C to +70°C. Confirm that the component meets RoHS compliance requirements for your assembly process. Ensure the source documentation explicitly lists this part number as available from authorized distributors to avoid counterfeit risks.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select the MAX4552CPE when four independently controlled normally open SPST switches are required. This part is suitable for applications needing low-voltage operation down to +2.7V single supply. Consider the MAX4551 if normally closed switches are needed, or the MAX4553 for a mixed configuration. Ensure the system can handle the maximum differential voltage of 13.0V between V+ and V-.

Analog Switches, Multiplexers, Demultiplexers Part Context

The MAX4552 is part of the MAX4551/MAX4552/MAX4553 family of quad, low-voltage, SPST analog switches. These devices are pin-compatible with industry-standard DG211/DG212/DG213 switches. The family shares identical electrical characteristics and pinouts, differing only in the default state of the switches (normally open, normally closed, or mixed).

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

The MAX4552CPE is pin-compatible with the DG212. Verify that substitute components support the same ±15kV ESD protection level and analog signal range requirements.