MAX4601EPE

$4.91

Description：IC SWITCH SPST-NCX4 2.5OHM 16DIP
Series：-

SKU:67928a03f682 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MAX4601EPE is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH SPST-NCX4 2.5OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for MAX4601EPE

Description：IC SWITCH SPST-NCX4 2.5OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube,Tube
Switch Circuit：SPST - NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：2.5Ohm
Channel-to-Channel Matching (ΔRon)：100mOhm
Voltage - Supply, Single (V+)：4.5V ~ 36V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：250ns, 350ns
-3db Bandwidth：-
Charge Injection：120pC
Channel Capacitance (CS(off), CD(off))：55pF, 55pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-59dB @ 1MHz
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：4

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for MAX4601EPE

MAX4601EPE

Analog Switches, Multiplexers, Demultiplexers Overview

The MAX4601EPE is a quad single-pole single-throw (SPST) analog switch in a 16-pin Plastic DIP package. It features a maximum on-resistance of 2.5Ω with guaranteed matching and flatness of 0.5Ω over the signal range. The device supports single supplies from +4.5V to +36V or dual supplies from ±4.5V to ±20V. Key electrical parameters include a turn-on time of 250ns, turn-off time of 350ns, off-leakage current of 0.5nA, and charge injection of 120pC. It operates within a temperature range of -40°C to +85°C.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Rail-to-rail signal handling capability for full voltage range operation
TTL/CMOS-compatible control inputs ensuring logic compatibility
Low power consumption suitable for battery-operated applications

Analog Switches, Multiplexers, Demultiplexers Applications

Reed relay replacement in automated test equipment
Audio-signal routing systems
Communication systems and PBX/PABX switching

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix EPE confirms the 16-pin Plastic DIP package and industrial temperature range (-40°C to +85°C). Confirm that the component meets RoHS standards if required by the design specifications. Check for obsolescence status as older Maxim products may have limited availability.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this part when low distortion and high channel matching are critical. Ensure the application requires normally closed switches, as the MAX4601 differs from the MAX4602 (normally open) and MAX4603 (mixed). Verify that the 2.5Ω on-resistance meets the signal integrity requirements compared to higher resistance alternatives.

Analog Switches, Multiplexers, Demultiplexers Part Context

This component belongs to the MAX4601/MAX4602/MAX4603 family of CMOS analog switches manufactured by Analog Devices / Maxim Integrated. The MAX4601 specifically provides four normally closed switches, distinguishing it from the other variants in the series which offer different contact configurations.