MCA2230G

$0.78

Description：OPTOISO 5.3KV DARL W/BASE 6-DIP
Series：MCA2230
Mfr：Isocom Components 2004 LTD
Package：Tube

SKU:d782695882f3 Category: Transistor, Photovoltaic Output Optoisolators Brand: Isocom Components 2004 LTD

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MCA2230G is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Isocom Components 2004 LTD. Its product description is OPTOISO 5.3KV DARL W/BASE 6-DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for MCA2230G

Description：OPTOISO 5.3KV DARL W/BASE 6-DIP
Series：MCA2230
Mfr：Isocom Components 2004 LTD
Package：Tube
Number of Channels：1
Voltage - Isolation：5300Vrms
Current Transfer Ratio (Min)：100% @ 10mA
Current Transfer Ratio (Max)：-
Turn On / Turn Off Time (Typ)：10µs, 100µs
Rise / Fall Time (Typ)：-
Input Type：DC
Output Type：Darlington with Base
Voltage - Output (Max)：30V
Current - Output / Channel：-
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：80 mA
Vce Saturation (Max)：1V
Operating Temperature：-55°C ~ 100°C
Mounting Type：Through Hole
Package / Case：6-DIP (0.400", 10.16mm)
Supplier Device Package：6-DIP
Grade：-
Qualification：-

Transistor, Photovoltaic Output Optoisolators datasheet and documents for MCA2230G

MCA2230G

Transistor, Photovoltaic Output Optoisolators Overview

The MCA2230G is a Triac Output Optocoupler with Zero Cross Voltage Switching, manufactured by Isocom Components. It features a single element configuration housed in a DIP-6 package for through-hole mounting. The device provides 5300 V isolation voltage and complies with RoHS standards. Key electrical parameters include a maximum forward current of 0.05 A, a nominal input trigger current of 5 mA, and a maximum on-state current of 0.1 A. It supports a peak surge current of 1.2 A and operates within a temperature range of -40 °C to 100 °C.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Zero-cross voltage switching capability for reduced electromagnetic interference
High isolation voltage ensuring safe circuit separation
Single-element triac output configuration

Transistor, Photovoltaic Output Optoisolators Applications

Solid-state relay control circuits
AC power switching applications
Industrial motor control systems

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific manufacturer designation, as Isocom Components may be associated with Isocom Electronics or similar entities. Confirm that the 'G' suffix indicates RoHS compliance and lead-free status as stated in the provided data. Ensure the DIP-6 package type matches the target PCB footprint requirements before finalizing procurement orders.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when zero-cross switching is required to minimize noise in AC control circuits. The low input trigger current of 5 mA allows compatibility with standard logic outputs. Verify that the 0.1 A on-state current meets the load requirements, as higher currents may necessitate alternative optocouplers with greater thermal handling capabilities.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the family of Triac Output Optocouplers with Zero Cross Voltage Switching from Isocom Components. Similar devices include the MOC3063G, which shares the same functional architecture and isolation characteristics. These components are designed for reliable AC switching in industrial and consumer electronics applications requiring galvanic isolation.