MCP6293-E/P

Instrumentation, Op Amps, Buffer Amps Overview

The MCP6293-E/P is a single-channel operational amplifier from the Microchip Technology MCP6291/1R/2/3/4/5 family. It features a typical gain bandwidth product of 10 MHz and a slew rate of 7 V/µs. The device operates on a supply voltage ranging from 2.4V to 6.0V with a typical quiescent current of 1.0 mA per amplifier. It supports rail-to-rail input and output swing, offering an extended operating temperature range from -40°C to +125°C. The component includes a Chip Select (CS) pin for low-power mode control and is housed in an 8-pin PDIP package.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Features a Chip Select (CS) digital input that places the device into a low-power mode when activated.
• Supports rail-to-rail input and output voltage swings, allowing operation close to both supply rails.
• Designed with advanced CMOS process technology to provide wide bandwidth relative to its low power consumption.
• Includes protection against phase reversal when input voltages exceed the supply voltage limits.

Instrumentation, Op Amps, Buffer Amps Applications

• Automotive systems requiring AEC-Q100 Grade 1 qualification
• Photodiode amplifier circuits
• Analog filter designs
• Battery-powered portable equipment

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix 'E/P' corresponds to the standard extended temperature range (-40°C to +125°C) and PDIP packaging. Confirm the datasheet revision matches the required specifications. Ensure the ordering code aligns with the manufacturer's current production status. Cross-reference the part number with official distributor catalogs to validate availability and authenticity before procurement.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component for applications requiring a single op amp with integrated power management via the CS pin. It is suitable for designs needing rail-to-rail performance at low supply voltages. Consider the 10 MHz bandwidth and 1.0 mA current draw for general-purpose signal conditioning. Verify that the PDIP package fits the board layout constraints compared to surface-mount alternatives like SOIC or MSOP.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the MCP629x family of 1.0 mA, 10 MHz Rail-to-Rail Op Amps. The family includes single, dual, and quad configurations. The MCP6293 specifically denotes the single-channel variant equipped with a Chip Select feature. Other variants include the MCP6291 (single without CS), MCP6292 (dual), MCP6294 (quad), and MCP6295 (dual with CS).

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Check for MCP6291-E/P if the Chip Select functionality is not required. For dual-channel needs, consider MCP6292-E/P. Surface-mount equivalents are available as MCP6293T-E/SN or MCP6293T-E/CH depending on the preferred package type.