MCP6V01T-E/MNY

Instrumentation, Op Amps, Buffer Amps Overview

The MCP6V01T-E/MNY is a single-channel, auto-zero operational amplifier manufactured by Microchip Technology in an 8-lead TDFN package. It features input offset voltage correction for high DC precision, with a maximum input offset voltage of ±2 µV and drift of ±50 nV/°C. The device operates on a supply voltage range of 1.8 V to 5.5 V, drawing a typical quiescent current of 300 µA. Key electrical specifications include a gain bandwidth product of 1.3 MHz, a slew rate of 0.5 V/µs, and minimum PSRR and CMRR of 130 dB. It supports rail-to-rail input and output operation and functions within an extended temperature range of -40°C to +125°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

• Input offset voltage correction mechanism ensures very low offset and minimal drift over temperature variations.
• Rail-to-rail input and output capabilities allow full signal swing across the supply voltage range.
• Auto-zero architecture eliminates 1/f noise and strongly rejects switching noise interference.
• Unity gain stability combined with high open-loop gain facilitates easy integration into general-purpose circuits.

Instrumentation, Op Amps, Buffer Amps Applications

• Portable instrumentation
• Sensor conditioning
• Temperature measurement
• DC offset correction
• Medical instrumentation

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix 'E/MNY' corresponds to the TDFN-8 package and extended temperature grade (-40°C to +125°C) as defined in the datasheet. Confirm that the 'T' designation indicates tape and reel packaging if bulk quantities are required. Ensure compatibility with AEC-Q100 automotive qualification standards if applicable to the target application environment.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when ultra-low offset voltage and drift are critical requirements compared to standard CMOS op amps. It is suitable for applications requiring low power consumption under 1.8 V supplies while maintaining high DC accuracy. Consider the MCP6V03 variant if chip select functionality is needed for power management, or the MCP6V02 for dual-channel solutions within the same family.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the MCP6V01/2/3 family of zero-drift operational amplifiers designed using an advanced CMOS process. The family includes single-channel (MCP6V01), dual-channel (MCP6V02), and single-channel with Chip Select (MCP6V03) variants. These devices share core performance characteristics such as 1.3 MHz gain bandwidth and 300 µA quiescent current, differing primarily in channel count and digital control features.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

Direct functional substitutes within the same package and specification profile include MCP6V02T-E/MNY for dual-channel needs or MCP6V03T-E/MNY if chip select control is desired. For non-auto-zero alternatives with lower noise but higher offset, consider the MCP6V06 or MCP6V07 series, though DC precision will differ significantly.

Instrumentation, Op Amps, Buffer Amps FAQ

Does the MCP6V01T-E/MNY exhibit phase reversal during input overdrive?

No, the device does not exhibit input phase reversal even when subjected to overdrive conditions, ensuring stable output behavior.

What is the typical input bias current for this amplifier?

The typical input bias current is 1 pA at +25°C, increasing to approximately 60 pA at +85°C and up to 5000 pA at +125°C.