MCT210G

Transistor, Photovoltaic Output Optoisolators Overview

The MCT210G is a single-channel optocoupler manufactured by Isocom Components 2004 LTD. It integrates an infrared LED with an NPN silicon phototransistor in a 6-DIP package. Key electrical parameters include a 5300Vrms isolation voltage, 50mA maximum output current, and a typical rise/fall time of 5µs/4µs. The device operates within a temperature range of -55°C to 100°C and features a minimum current transfer ratio of 150% at 10mA input.

Transistor, Photovoltaic Output Optoisolators Feature Summary

• Integrates an infrared light emitting diode and an NPN silicon phototransistor for signal isolation
• Provides high voltage isolation capability between input and output circuits
• Features a standard 6-pin dual in-line plastic package for through-hole mounting

Transistor, Photovoltaic Output Optoisolators Applications

• General purpose signal isolation
• Logic level shifting
• Switching applications requiring galvanic isolation

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the manufacturer designation as Isocom Components 2004 LTD or ISOCOM COMPONENTS LIMITED on official datasheets. Confirm the 6-DIP package type and transistor output configuration match system requirements. Ensure compliance with RoHS standards if applicable to the specific production batch.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component for applications requiring a single-channel phototransistor output with high isolation voltage. Consider the 50mA output current limit and 5300Vrms isolation rating when designing circuit interfaces. Verify that the 6-DIP through-hole package fits the PCB layout constraints.

Transistor, Photovoltaic Output Optoisolators Part Context

The MCT210G belongs to the MCT2 series of optically coupled isolators. This series typically includes variants like the MCT210 and MCT271. These devices are designed for general-purpose isolation tasks, offering a balance of performance and cost-effectiveness in industrial and consumer electronics.

Transistor, Photovoltaic Output Optoisolators Replacement Considerations

Publicly confirmed substitute part numbers were not identified in the provided source material. Cross-referencing with similar NPN phototransistor output optocouplers in 6-DIP packages may be necessary if direct substitutes are unavailable.

Transistor, Photovoltaic Output Optoisolators FAQ

What is the isolation voltage rating of the MCT210G?

The MCT210G has an isolation voltage rating of 5300Vrms.

What is the package type for the MCT210G?

The MCT210G is housed in a 6-pin Dual In-Line Package (6-DIP).