MOC3063X

$0.78

Description：OPTOISOLTR 5.3KV TRIAC 1CH 6-DIP
Series：-
Mfr：Isocom Components 2004 LTD
Package：Tube

SKU:2c0c6ce3d2de Category: Triac, SCR Output Optoisolators Brand: Isocom Components 2004 LTD

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

MOC3063X is listed in the Triac, SCR Output Optoisolators range at ChipApex. The manufacturer field lists Isocom Components 2004 LTD. Its product description is OPTOISOLTR 5.3KV TRIAC 1CH 6-DIP. Review the specifications below when checking this part for your BOM.

Triac, SCR Output Optoisolators specifications for MOC3063X

Description：OPTOISOLTR 5.3KV TRIAC 1CH 6-DIP
Series：-
Mfr：Isocom Components 2004 LTD
Package：Tube
Output Type：Triac
Zero Crossing Circuit：Yes
Number of Channels：1
Voltage - Isolation：5300Vrms
Voltage - Off State：600 V
Static dV/dt (Min)：600V/µs
Current - LED Trigger (Ift) (Max)：5mA
Current - On State (It (RMS)) (Max)：-
Current - Hold (Ih)：400µA (Typ)
Turn On Time：-
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：50 mA
Operating Temperature：-40°C ~ 100°C
Mounting Type：Through Hole
Package / Case：6-DIP (0.300", 7.62mm)
Supplier Device Package：6-DIP
Approval Agency：UR, VDE

Triac, SCR Output Optoisolators datasheet and documents for MOC3063X

MOC3063X

Triac, SCR Output Optoisolators Overview

The MOC3063X is a Triac Output Optocoupler featuring a Gallium Arsenide infrared emitting diode coupled with a monolithic silicon detector. It provides 5300Vrms isolation voltage and supports a maximum repetitive peak off-state voltage of 600V. The device operates within a temperature range of -40°C to +100°C, with a maximum forward current of 50mA and a nominal input trigger current of 5mA. Packaged in a 6-pin DIP configuration, it includes zero-crossing detection capabilities for precise AC load control.

Triac, SCR Output Optoisolators Feature Summary

Integrates an infrared LED with a monolithic silicon triac detector for reliable signal isolation
Incorporates internal zero-crossing circuitry to minimize electromagnetic interference during switching
Provides high-voltage electrical isolation between input and output circuits

Triac, SCR Output Optoisolators Applications

Solid state relays
AC motor speed control
Lighting dimmer circuits

Triac, SCR Output Optoisolators Procurement Notes

Verify the specific suffix (e.g., X, SM) against official Isocom documentation to confirm package type and tape/reel specifications. Ensure compliance requirements such as UL recognition and VDE standards match the target application's regulatory needs before finalizing procurement.

Triac, SCR Output Optoisolators Selection Notes

Select this component when zero-crossing switching is required to reduce noise in AC power applications. Confirm that the 600V blocking voltage and 1A surge current ratings exceed the expected load parameters. Verify thermal derating requirements if operating near the upper temperature limit.

Triac, SCR Output Optoisolators Part Context

This part belongs to the MOC306x series of optotriacs designed for AC power switching. It serves as a direct replacement for legacy components in industrial control systems. The series emphasizes robust isolation and low-noise operation suitable for sensitive electronic environments.