PS9513L2-AX

Logic Output Optoisolators Overview

The PS9513L2-AX is a high-speed photocoupler manufactured by Renesas Electronics, designed for intelligent power module (IPM) drive interfaces. It features a single channel with a data rate of 1 Mb/s and an insulation voltage of 5000 Vrms. The device utilizes a GaAlAs LED input and a photo IC output, housed in an 8-pin DIP surface-mount package. Key electrical parameters include a forward current of 10 mA, forward voltage of 1.65 V, reverse voltage of 5 V, output current of 15 mA, and power dissipation of 100 mW. It operates within a temperature range of -40°C to +100°C.

Logic Output Optoisolators Feature Summary

• Designed specifically for high common mode transient immunity (CMR) and low pulse width distortion with operating temperature.
• Optically coupled isolator containing a GaAlAs LED on the input side and a signal processing circuit on the output side.
• Suitable for gate drive interface applications in intelligent power modules.

Logic Output Optoisolators Applications

• Intelligent Power Module (IPM) drive
• Gate drive interface
• High-speed signal isolation

Logic Output Optoisolators Procurement Notes

Verify the specific suffix against official Renesas documentation to confirm package type and compliance status. The PS9513L2-AX designation typically corresponds to the surface-mount DIP-8 variant. Ensure compatibility with IPM driver requirements regarding common mode rejection and propagation delay specifications before procurement.

Logic Output Optoisolators Selection Notes

Select this component when high common mode transient immunity is required for IPM applications. The 1 Mbps data rate and 5000 Vrms isolation voltage support robust noise immunity. Consider the 8-pin DIP surface-mount package for PCB layout constraints. Verify thermal performance within the specified -40°C to +100°C operating range.

Logic Output Optoisolators Part Context

The PS9513L2-AX belongs to the PS9513 family of high-speed photocouplers from Renesas Electronics. This series includes variants such as PS9513, PS9513L1, PS9513L2, and PS9513L3, differentiated primarily by lead content and packaging style. The L2 variant specifically denotes the surface-mount configuration within this optimized gate drive interface lineup.

Logic Output Optoisolators Replacement Considerations

Official substitutes within the same family include PS9513, PS9513L1, and PS9513L3, provided pinout and electrical characteristics match the design requirements. Cross-referencing datasheets is essential to verify package dimensions and isolation ratings.