RBV5006

Bridge Rectifier Overview

The RBV5006 is a silicon bridge rectifier manufactured by EIC Semiconductor Inc., designed for high current applications. It features a maximum average forward current of 50 Amperes at a case temperature of 55°C and supports a maximum repetitive peak reverse voltage of 600 Volts. The device exhibits a maximum forward voltage drop of 1.1 Volts at 25 Amperes and a peak forward surge current capability of 400 Amperes. Thermal resistance from junction to case is typically 1.5°C/W, with an operating junction temperature range spanning -40°C to +150°C.

Bridge Rectifier Feature Summary

• High current and surge current capabilities suitable for demanding power conversion tasks
• Low forward voltage drop and low reverse leakage current for improved efficiency
• Rated isolation voltage of 2000 VAC ensuring robust dielectric strength
• Moisture sensitivity level 1 classification allowing unlimited floor life before baking

Bridge Rectifier Applications

• Printed circuit board mounted power supplies
• General purpose rectification in industrial equipment
• Battery charging circuits requiring high reliability

Bridge Rectifier Procurement Notes

Verify the component authenticity against the official datasheet revision dated December 15, 2017. Confirm that the package matches the mechanical dimensions provided, specifically the mounting hole diameter of 3.2 mm and terminal spacing. Ensure compliance with RoHS standards as the product is lead-free. Check storage conditions to maintain the specified moisture sensitivity level prior to assembly.

Bridge Rectifier Selection Notes

Select this component when a 50 Ampere continuous current rating and 600 Volt blocking voltage are required. Consider the thermal resistance value if heatsinking is necessary for operation above 55°C case temperature. Evaluate the surge current limit of 400 Amperes against potential inrush currents in the target circuit design to ensure adequate safety margins during startup phases.

Bridge Rectifier Part Context

This part belongs to the RBV5000 series, which covers voltage ratings from 50 to 1000 Volts while maintaining a constant 50 Ampere current capacity. The RBV5006 specifically addresses the 600 Volt requirement within this lineup. It utilizes molded plastic construction with UL94V-0 flame retardant epoxy, distinguishing it from higher power screw-mount alternatives in the manufacturer's portfolio.

Bridge Rectifier Replacement Considerations

Cross-reference with other manufacturers offering RBV5006 equivalents such as SynSemi or ASEMI Technology. Verify that substitute parts match the 600V VRRM, 50A IF(AV), and physical footprint dimensions. Ensure the alternative maintains the same thermal resistance and polarity marking conventions for direct PCB replacement.