SG-9101CG-D30PHDBA

Programmable Oscillators Overview

The SG-9101CG-D30PHDBA is a programmable crystal oscillator from the Epson SG-9101 series. It features CMOS output and operates within a supply voltage range of 1.62V to 3.63V. The device supports frequency programming between 670 kHz and 170 MHz. It utilizes a 4-SMD, no lead package with dimensions of 2.50mm x 2.00mm. The component includes enable/disable functionality and is designed for surface mount installation.

Programmable Oscillators Feature Summary

• Programmable frequency generation capability
• CMOS output signal type
• Integrated enable and disable control function

Programmable Oscillators Applications

• General purpose clock generation in electronic systems
• Embedded system timing references
• Digital circuit synchronization

Programmable Oscillators Procurement Notes

Verify the specific frequency order code required during procurement, as this model represents a programmable variant. Confirm that the target application voltage falls within the specified 1.62V to 3.63V range. Ensure the PCB footprint matches the 4-SMD no-lead package dimensions of 2.50mm by 2.00mm. Check compatibility with the operating temperature range of -40°C to 85°C for the intended environment.

Programmable Oscillators Selection Notes

Select this component when a precise, user-defined frequency is required within the 670 kHz to 170 MHz range. It is suitable for designs needing low profile surface mount packaging. Consider the CMOS output drive strength and the need for software or hardware configuration to set the desired clock rate before deployment.

Programmable Oscillators Part Context

This part belongs to the SG-9101CG series of programmable spread spectrum crystal oscillators. It shares the same physical package and basic electrical characteristics with other variants in the series, differing primarily in the programmed frequency and specific ordering suffixes. It serves as a flexible timing source replacing fixed-frequency crystals.

Programmable Oscillators Replacement Considerations

Direct replacements must match the 4-SMD no-lead package and 1.62V-3.63V supply range. Verify that substitute parts support the required frequency range and CMOS output logic levels. Cross-reference the pinout and thermal characteristics to ensure mechanical and electrical compatibility.