SL 1 230 23 S

Headers, Male Pins Overview

The SL 1 230 23 S is a male pin header connector from Fischer Elektronik, designed for through-hole mounting on printed circuit boards. It features a single row of 23 contacts with a standard 2.54 mm (0.100 inch) pitch. The housing is constructed from PA 4.6 GF insulating material, providing mechanical stability and thermal resistance. Contacts are tin-plated copper alloy, ensuring reliable electrical connection with a volume resistance of ≤5 mΩ. The nominal current rating is 3 A at a nominal voltage of 250 V AC, with a test voltage capability of 2000 V. The straight termination style facilitates direct board insertion.

Headers, Male Pins Feature Summary

• Through-hole straight pin header configuration for secure PCB mounting
• Single row design with 23 positions for standardized signal routing
• Tin-plated contact surfaces for corrosion resistance and conductivity
• PA 4.6 GF insulating body for structural integrity and heat tolerance

Headers, Male Pins Applications

• General-purpose electronic equipment interconnects
• Industrial control panel wiring
• Consumer electronics assembly
• Test and measurement device interfaces

Headers, Male Pins Procurement Notes

Verify the specific ordering suffix 'S' corresponds to the tin-plated variant as documented in official Fischer Elektronik catalogs. Confirm that the 23-position count matches the required circuit density. Ensure compatibility with mating female headers regarding pin diameter and insulation height. Cross-reference the RoHS compliance status with current regulatory requirements for the target market. Validate that the through-hole soldering process aligns with the manufacturer's recommended thermal profiles.

Headers, Male Pins Selection Notes

Select this component when a single-row, 2.54 mm pitch male header is required for through-hole applications. The 23-contact count suits designs needing moderate channel density without excessive board space consumption. The tin plating offers a cost-effective solution for non-high-frequency or low-corrosion environments. Consider the PA 4.6 GF material if higher thermal stability during soldering is needed compared to standard nylon variants. Ensure mating connectors match the 0.635 mm contact diameter specification.

Headers, Male Pins Part Context

This part belongs to the SL 1 series of Fischer Elektronik board connectors, which are widely used in industrial and commercial electronics. The series offers various contact counts and plating options to suit different electrical and environmental needs. The SL 1 230 23 S specifically addresses the need for a mid-range contact count with standard tin plating, balancing performance and manufacturability. It complements other variants in the series that may feature gold plating or different row configurations.

Headers, Male Pins Replacement Considerations

Direct substitutes include other Fischer Elektronik headers within the SL 1 series sharing the same 2.54 mm pitch and 23-position layout. Verify that alternative suppliers offer components with identical pin dimensions and insulation heights to ensure mechanical fit. Check that mating connectors from third-party sources adhere to the same standard spacing to prevent misalignment. Confirm that any replacement maintains the 3 A current rating and 250 V AC voltage rating for equivalent electrical safety.