SL 10 SMD 052 15 G

Headers, Male Pins Overview

The SL 10 SMD 052 15 G is a surface mount male pin header manufactured by Fischer Elektronik. It features a single row with 15 positions and a 2.54 mm (0.100 inch) pitch. The connector utilizes solder termination and push-pull fastening. Key physical dimensions include a contact length of 5.50 mm and an insulation height of 2.79 mm. The contacts are square-shaped. Electrical ratings specify a nominal voltage of 250 V AC and a test voltage of 2000 V. The insulating body is constructed from PA 4.6 GF material, supporting an operating temperature range starting at -40°C.

Headers, Male Pins Feature Summary

• Surface mount design for automated PCB assembly
• Push-pull fastening mechanism for secure connection
• Square contact shape for reliable mating
• High dielectric strength insulation

Headers, Male Pins Applications

• Board-to-board interconnections
• Wire-to-board connections
• General electronic equipment signal routing

Headers, Male Pins Procurement Notes

Verify the specific ordering suffix to confirm plating thickness and reel packaging details. Ensure the selected variant matches the required surface mount orientation and terminal count. Cross-reference the datasheet for precise thermal reflow profiles compatible with the PA 4.6 GF insulation material. Confirm availability of the specific reel diameter if automated placement is planned.

Headers, Male Pins Selection Notes

Select this component when a single-row 15-position surface mount header is required. The 2.54 mm pitch is standard for general-purpose electronics. Consider the push-pull feature if mechanical retention during mating cycles is critical. Verify that the 250 V AC rating meets the circuit requirements. Check the -40°C lower temperature limit against environmental specifications.

Headers, Male Pins Part Context

This part belongs to the SL 10 SMD series of pin headers from Fischer Elektronik. The series offers various pole counts and configurations for surface mount applications. Similar parts in the lineup include different position counts such as 10 or 21 poles, maintaining the same 2.54 mm pitch and surface mount termination style for consistent board layout strategies.

Headers, Male Pins Replacement Considerations

Direct substitutes must match the 15-position count, 2.54 mm pitch, and surface mount termination. Verify compatibility with the push-pull fastening type. Alternative manufacturers may offer similar headers but require validation of the square contact shape and PA 4.6 insulation material properties.