SN74LVC1G38DCKT

Inverter Gates Overview

The SN74LVC1G38DCKT is a single 2-input NAND gate from the Texas Instruments LVC logic family, housed in an SC-70 (SOT-353) surface-mount package. It operates within a supply voltage range of 1.65 V to 5.5 V and supports low-level output currents up to 32 mA. The device features open-drain outputs and exhibits a maximum propagation delay of 4.5 ns at 5 V with a 50 pF load. It functions reliably across an extended temperature range from -40°C to +125°C.

Inverter Gates Feature Summary

• Open-drain output configuration suitable for level shifting and wired-OR applications
• Wide operating voltage range supporting both 1.8 V and 5 V systems
• High noise immunity and low power consumption characteristics

Inverter Gates Applications

• General-purpose digital logic processing
• Level translation between different voltage domains
• Bus-oriented switching applications

Inverter Gates Procurement Notes

Verify the exact suffix DCKT to confirm the SC-70 package type and tape-and-reel quantity. Ensure compatibility with the target PCB footprint and reflow soldering profile. Confirm RoHS compliance status through official manufacturer documentation before integration into regulated products.

Inverter Gates Selection Notes

Select this component when an open-drain NAND function is required in a minimal footprint. Compare against push-pull variants if active high drive is necessary. Verify that the open-drain nature aligns with the downstream circuit requirements for pull-up resistors.

Inverter Gates Part Context

This part belongs to the SN74LVC1Gxx series of single-function gates designed for portable and battery-powered applications. The LVC series offers performance comparable to older standards while consuming significantly less power. The SC-70 package provides space efficiency for dense board layouts.

Inverter Gates Replacement Considerations

SN74LVC1G38DBVTG4: Same logical function but utilizes a SOT-23-5 package instead of SC-70. Verify pinout compatibility and physical dimensions before substitution.