SN74LVCR16245ADL

$1.19

Description：IC TXRX NON-INVERT 3.6V 48SSOP
Series：74LVCR
Mfr：Texas Instruments
Package：Tube,Tube

SKU:1723acfad220 Category: Buffers, Drivers, Receivers, Transceivers Brand: Texas Instruments

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

SN74LVCR16245ADL is listed in the Buffers, Drivers, Receivers, Transceivers range at ChipApex. The manufacturer field lists Texas Instruments. Its product description is IC TXRX NON-INVERT 3.6V 48SSOP. Review the specifications below when checking this part for your BOM.

Buffers, Drivers, Receivers, Transceivers specifications for SN74LVCR16245ADL

Description：IC TXRX NON-INVERT 3.6V 48SSOP
Series：74LVCR
Mfr：Texas Instruments
Package：Tube,Tube
Logic Type：Transceiver, Non-Inverting
Number of Elements：2
Number of Bits per Element：8
Input Type：-
Output Type：3-State
Current - Output High, Low：12mA, 12mA
Voltage - Supply：1.65V ~ 3.6V
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Surface Mount
Package / Case：48-BSSOP (0.295", 7.50mm Width)
Supplier Device Package：48-SSOP
Grade：-
Qualification：-

Buffers, Drivers, Receivers, Transceivers datasheet and documents for SN74LVCR16245ADL

SN74LVCR16245ADL

Buffers, Drivers, Receivers, Transceivers Overview

The SN74LVCR16245ADL is a Texas Instruments bus transceiver from the LVCR logic series, housed in an SSOP-48 package. It operates within a supply voltage range of 2.7 V to 3.6 V and supports LVTTL input and output levels. The device features 16 channels with tri-state outputs, providing a low-level output current of 12 mA and a high-level output current of -12 mA. It exhibits a propagation delay of 8.5 ns and functions as two independent 8-bit or one 16-bit non-inverting transceiver. The component is rated for operation between -40°C and +85°C, with a maximum power supply current of 20 µA.

Buffers, Drivers, Receivers, Transceivers Feature Summary

Provides bidirectional data transmission via 16-channel tri-state bus architecture
Supports low-voltage operation compatible with LVTTL logic levels
Enables flexible configuration as dual 8-bit or single 16-bit transceivers

Buffers, Drivers, Receivers, Transceivers Applications

High-density memory interface circuits
Microprocessor-based system data buses
Control signal routing in embedded systems

Buffers, Drivers, Receivers, Transceivers Procurement Notes

Verify the specific suffix 'ADL' against the manufacturer's official documentation to confirm the exact package variant and tape-and-reel specifications. Ensure the selected component matches the required operating temperature range and voltage parameters for the target application environment before finalizing procurement orders.

Buffers, Drivers, Receivers, Transceivers Selection Notes

Select this component when designing systems requiring low-power consumption with moderate drive strength. The LVCR series offers lower current draw compared to standard LVTH or ABTH families, making it suitable for battery-operated or thermally constrained applications where 12 mA output drive is sufficient for the load requirements.

Buffers, Drivers, Receivers, Transceivers Part Context

This part belongs to the SN74LVCR16245A family of low-voltage CMOS bus transceivers. It complements other Texas Instruments logic devices by offering a specialized balance between power efficiency and signal integrity for 3.3V systems, distinct from higher-speed ABTH or wider-voltage LVC variants.