SN74LVT162245AZQLR

$1.09

Description：IC TXRX NON-INVERT 3.6V 56BGA
Series：74LVT
Mfr：Texas Instruments
Package：Tape & Reel (TR)

SKU:e32d3396ca8e Category: Buffers, Drivers, Receivers, Transceivers Brand: Texas Instruments

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

SN74LVT162245AZQLR is listed in the Buffers, Drivers, Receivers, Transceivers range at ChipApex. The manufacturer field lists Texas Instruments. Its product description is IC TXRX NON-INVERT 3.6V 56BGA. Review the specifications below when checking this part for your BOM.

Buffers, Drivers, Receivers, Transceivers specifications for SN74LVT162245AZQLR

Description：IC TXRX NON-INVERT 3.6V 56BGA
Series：74LVT
Mfr：Texas Instruments
Package：Tape & Reel (TR)
Logic Type：Transceiver, Non-Inverting
Number of Elements：2
Number of Bits per Element：8
Input Type：-
Output Type：3-State
Current - Output High, Low：12mA, 12mA; 32mA, 64mA
Voltage - Supply：2.7V ~ 3.6V
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Surface Mount
Package / Case：56-VFBGA
Supplier Device Package：56-BGA Microstar Junior (7x4.5)
Grade：-
Qualification：-

Buffers, Drivers, Receivers, Transceivers datasheet and documents for SN74LVT162245AZQLR

SN74LVT162245AZQLR

Buffers, Drivers, Receivers, Transceivers Overview

The SN74LVT162245AZQLR is a 3.3-V ABT 16-bit bus transceiver with 3-state outputs, designed for low-voltage operation and mixed-mode signal support. It operates within a supply voltage range of 2.7 V to 3.6 V and supports an operating temperature range from -55 °C to 125 °C. The device features distributed VCC and GND pins to minimize high-speed switching noise and includes equivalent 22-Ω series resistors on A-port outputs. Propagation delays are specified between 1 ns and 6.5 ns depending on direction and voltage.

Buffers, Drivers, Receivers, Transceivers Feature Summary

Supports mixed-mode signal operation allowing 5-V input and output voltages with 3.3-V VCC
Provides Ioff and power-up 3-state functionality to enable safe hot-insertion without damaging backflow currents
Features flow-through architecture optimized for PCB layout efficiency

Buffers, Drivers, Receivers, Transceivers Applications

Asynchronous communication between two data buses
Hot-insertion applications requiring controlled power-up states
Mixed-mode signal environments interfacing 5-V systems with 3.3-V components

Buffers, Drivers, Receivers, Transceivers Procurement Notes

Verify the specific ZQL package suffix indicates the extended industrial temperature range (-55 °C to 125 °C) compared to standard commercial variants. Confirm that the ordering information matches the exact pinout and marking requirements for your design, as package options vary significantly across the LVT162245A family.

Buffers, Drivers, Receivers, Transceivers Selection Notes

Select this component when designing for wide temperature ranges or harsh environments requiring military-grade thermal specifications. Ensure the system accommodates the 2.7 V to 3.6 V supply range and utilizes the flow-through pin configuration for optimal routing. Verify that the 22-Ω internal series resistance on the A-port meets the overshoot and undershoot requirements of the connected loads.

Buffers, Drivers, Receivers, Transceivers Part Context

This part belongs to the Texas Instruments Widebus family of 3.3-V ABT bus transceivers. It is functionally similar to other members like the SN74LVT162245ADGGR but differs in package type (VFBGA-ZQL) and extended temperature rating. The device provides non-inverting transmission with independent direction control for each octal section.