SW8-005060AN1NF

RF Switches Overview

The SW8-005060AN1NF is an SP8T RF switch module manufactured by L3 Narda-MITEQ. It operates within a frequency range of 0.2 to 2 GHz. The device features a maximum insertion loss of 4.5 dB and a minimum isolation of 50 dB. The maximum voltage standing wave ratio (VSWR) is 2:1. Typical rise and fall times are less than 300 ns. The module utilizes SMA connectors and requires +5 VDC and -12 VDC power supplies.

RF Switches Feature Summary

• Single-pole eight-throw topology for signal routing
• Wide frequency coverage from 0.2 to 2 GHz
• High isolation performance exceeding 50 dB
• Low insertion loss with typical switching speeds under 300 ns

RF Switches Applications

• RF signal distribution networks
• Test and measurement instrumentation
• Telecommunications base stations
• Electronic warfare systems

RF Switches Procurement Notes

Verify the specific suffix codes against official L3 Narda-MITEQ documentation to ensure correct connector types and pin configurations. Confirm that the required DC supply voltages (+5 VDC and -12 VDC) match the system design specifications before integration. Ensure compatibility with SMA interface requirements for the intended application environment.

RF Switches Selection Notes

Select this component when an SP8T configuration is required within the 0.2 to 2 GHz band. Consider the 4.5 dB maximum insertion loss and 50 dB isolation limits relative to system budget requirements. Verify that the module form factor and SMA interfaces align with the physical layout constraints of the assembly.

RF Switches Part Context

This part belongs to the SW8 series of single-pole multi-throw switches from L3 Narda-MITEQ. These modules are designed for high-performance RF applications requiring reliable signal switching. The series offers various frequency ranges, with this specific model covering the lower microwave bands up to 2 GHz.

RF Switches Replacement Considerations

Cross-reference with other SW8 series models such as SW8-005020RN1NF or SW8-005020AN1NF if different frequency ranges or connector options are needed. Verify electrical parameter compatibility before substitution.