SX7M1.8432B10F20TNN

Oscillators Overview

The SX7M1.8432B10F20TNN is a standard CMOS crystal oscillator manufactured by Shenzhen SCTF Electronics. It operates at a frequency of 1.8432 MHz and requires a 3.3V supply voltage. The device features an enable/disable control function for power management. It is housed in a compact 4-SMD, No Lead package with dimensions corresponding to the SMD7050-4P form factor.

Oscillators Feature Summary

• CMOS output technology
• Enable/Disable control functionality
• Standard frequency stability

Oscillators Applications

• General electronic circuits requiring precise timing
• Embedded systems utilizing 3.3V logic levels
• Compact consumer electronics designs

Oscillators Procurement Notes

Verify the specific operating temperature range and load capacitance requirements against your system design before ordering. Confirm that the 3.3V supply voltage aligns with your power architecture. Ensure the SMD7050-4P footprint matches your PCB layout constraints. Cross-reference the datasheet for absolute maximum ratings to prevent component damage during operation.

Oscillators Selection Notes

Select this component when a 1.8432 MHz clock signal is required for 3.3V digital interfaces. The enable/disable feature makes it suitable for battery-powered applications where power conservation is critical. Consider the physical size of the 4-SMD package relative to available board space compared to larger through-hole alternatives.

Oscillators Part Context

This part belongs to the SX7M series of surface-mount oscillators from Shenzhen SCTF Electronics. The series typically offers various frequencies and packages. The 'B' suffix often denotes specific electrical characteristics or tolerance levels within the product line. It serves as a direct replacement for legacy through-hole crystals in modern miniaturized designs.

Oscillators Replacement Considerations

Check for SX7M1.8432A10F20TNN if different tolerance specifications are needed. Verify compatibility with SX3M1.8432B10F20TNN if a smaller 3.2x2.5mm package is preferred instead of the SMD7050-4P form factor.