SXT83418BA16-24.000M

Crystals Overview

The SXT83418BA16-24.000M is a parallel fundamental quartz crystal manufactured by Suntsu Electronics, Inc. It operates at a nominal frequency of 24 MHz with a load capacitance of 18 pF. The component features a frequency tolerance of ±30 ppm and an equivalent series resistance (ESR) of 60 Ohms. It utilizes a 4-SOJ surface-mount package with a 5.50 mm pitch, designed for precision timing applications requiring stable oscillation.

Crystals Feature Summary

• Parallel fundamental resonance mode operation
• Surface-mount 4-SOJ package configuration
• Precision frequency stability for timing circuits

Crystals Applications

• Precision timing circuits
• Microcontroller clock sources
• Communication equipment oscillators

Crystals Procurement Notes

Verify the specific suffix BA16 corresponds to the required 4-SOJ package dimensions and pin pitch. Confirm that the ±30 ppm tolerance meets system requirements. Ensure the 18 pF load capacitance matches the oscillator circuit design. Check for RoHS compliance status if environmental regulations apply to the final assembly.

Crystals Selection Notes

Select this component when a 24 MHz fundamental crystal is required in a compact 4-SOJ form factor. The 60 Ohm ESR suits standard oscillator loads. Consider the ±30 ppm tolerance against environmental temperature variations. Verify compatibility with host oscillator input impedance before integration into the design.

Crystals Part Context

This part belongs to the Suntsu SXT83418 series of surface-mount quartz crystals. The series offers various frequencies and packages. The BA16 suffix indicates the specific physical footprint and terminal arrangement. It serves as a passive frequency-determining element in electronic systems.

Crystals Replacement Considerations

Direct substitutes must match the 24 MHz frequency, 18 pF load capacitance, and 4-SOJ package. Equivalent parts from other manufacturers require verification of ESR and drive level specifications. Ensure mechanical dimensions align with existing PCB footprints.