TE0711-02-42I-1-A

Microcontrollers, Microprocessor, FPGA Modules Overview

The Trenz Electronic TE0711-02-42I-1-A is a System-on-Module (SOM) based on the AMD Artix-7 XC7A35T-2CSG324I FPGA. It features a 40 mm x 50 mm footprint with three high-density connectors providing access to multiple I/O banks. The module integrates dual S25FL256SAGBHI20 Quad SPI flash memory, an FTDI FT2232HQ USB-to-UART/FIFO bridge, and a PIC16F1825 system controller CPLD. Power management includes MPM3860GQW-Z and MPM3834CGPA converters supporting input voltages from 3.3V to 5.0V.

Microcontrollers, Microprocessor, FPGA Modules Feature Summary

• Core: Xilinx Artix-7 XC7A35T-2CSG324I FPGA
• Memory: Dual 256Mb Quad SPI Flash; Config EEPROM (93AA56BT)
• Interfaces: FTDI FT2232HQ for USB/JTAG/UART; JTAG programming via TE0790 adapter
• Power: 3.3V–5.0V VIN input; integrated DC-DC conversion

Microcontrollers, Microprocessor, FPGA Modules Applications

• Industrial automation and control systems
• Embedded vision and signal processing
• Prototyping and development of custom carrier boards

Microcontrollers, Microprocessor, FPGA Modules Procurement Notes

Verify component revisions against the provided schematic revision history. Confirm that the ordering suffix '42I' corresponds to the specific temperature grade and package variant required for your application environment. Ensure compatibility with standard 4x5 cm carrier board designs.

Microcontrollers, Microprocessor, FPGA Modules Selection Notes

Select this module when a moderate logic density Artix-7 solution is required within a compact form factor. The dual SPI flash configuration supports redundancy or large bitstream storage. Verify that the target carrier board can accommodate the 40mm x 50mm dimensions and provides the necessary power delivery for the 3.3V to 5.0V input range.

Microcontrollers, Microprocessor, FPGA Modules Part Context

This module belongs to the TE0711 series, designed for the 4x5 cm standard footprint. It serves as a drop-in replacement for other modules in the same family that utilize the same FPGA die but may differ in memory or peripheral configurations. The 'I' suffix typically denotes industrial temperature range components.

Microcontrollers, Microprocessor, FPGA Modules Replacement Considerations

Direct pin-compatible replacements within the TE0711 family include variants using the XC7A35T-2FGG676I package if higher I/O count is needed, though physical pin mapping must be verified. Cross-family migration to Kintex-7 SOMs requires significant carrier board redesign.