TS1854AIN

$1.09

Description：IC OPAMP GP 4 CIRCUIT 14DIP
Series：-
Mfr：STMicroelectronics
Package：Tube

SKU:e6076e4da464 Category: Instrumentation, Op Amps, Buffer Amps Brand: STMicroelectronics

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

TS1854AIN is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists STMicroelectronics. Its product description is IC OPAMP GP 4 CIRCUIT 14DIP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for TS1854AIN

Description：IC OPAMP GP 4 CIRCUIT 14DIP
Series：-
Mfr：STMicroelectronics
Package：Tube
Amplifier Type：General Purpose
Number of Circuits：4
Output Type：Rail-to-Rail
Slew Rate：0.25V/µs
Gain Bandwidth Product：630 kHz
Current - Input Bias：16 nA
Voltage - Input Offset：1 mV
Current - Supply：162µA
Current - Output / Channel：48 mA
Voltage - Supply Span (Min)：1.8 V
Voltage - Supply Span (Max)：6 V
Operating Temperature：-40°C ~ 125°C
Grade：-
Qualification：-
Mounting Type：Through Hole
Package / Case：14-DIP (0.300", 7.62mm)
Supplier Device Package：14-DIP
-3db Bandwidth：-

Instrumentation, Op Amps, Buffer Amps datasheet and documents for TS1854AIN

TS1854AIN

Instrumentation, Op Amps, Buffer Amps Overview

The TS1854AIN is a quad low-power operational amplifier manufactured by STMicroelectronics. It operates within a supply voltage range of 1.8V to 6V and features rail-to-rail input and output capabilities, extending from VDD - 0.2V to VCC + 0.2V. The device consumes 120µA per amplifier with a gain bandwidth product of 480kHz at 1.8V. It provides high unity gain stability capable of driving 500pF loads and includes ESD tolerance of 2kV. The component is housed in a DIP-14 package and supports an operating temperature range from -40°C to +125°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

Rail-to-rail input and output operation
Low power consumption of 120µA per amplifier
High unity gain stability for capacitive loads
Extended common mode voltage range

Instrumentation, Op Amps, Buffer Amps Applications

Two-cell battery-powered systems
Battery-powered electronic equipment
Cordless phones
Cellular phones
Laptops

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific ordering suffix 'IN' corresponds to the DIP-14 tube packaging configuration as defined in the manufacturer's official ordering information table. Confirm that the 'A' designation aligns with the required electrical specifications for input offset voltage and bias current limits before finalizing procurement decisions.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when designing portable circuits requiring simultaneous rail-to-rail signal handling and minimal power draw. The quad configuration reduces board space compared to single units. Ensure the application load does not exceed the specified capacitive drive requirements without stability verification.

Instrumentation, Op Amps, Buffer Amps Part Context

This part belongs to the TS185x family of micropower operational amplifiers designed for low-voltage applications. The series includes single (TS1851), dual (TS1852), and quad (TS1854) variants. The TS1854 variant specifically integrates four independent amplifiers into one package, maximizing integration density for multi-channel signal processing tasks.