USB3318-CP

$1.47

Description：IC TRANSCEIVER 24QFN
Mfr：Microchip Technology

SKU:413c5002b46e Category: Drivers, Receivers, Transceivers Brand: Microchip Technology

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

USB3318-CP is listed in the Drivers, Receivers, Transceivers range at ChipApex. The manufacturer field lists Microchip Technology. Its product description is IC TRANSCEIVER 24QFN. Review the specifications below when checking this part for your BOM.

Drivers, Receivers, Transceivers specifications for USB3318-CP

Description：IC TRANSCEIVER 24QFN
Mfr：Microchip Technology
Package：Tray
Series：flexPWR™
Type：Transceiver
Protocol：USB 2.0
Number of Drivers/Receivers：-
Duplex：-
Data Rate：-
Voltage - Supply：1.8V ~ 3.6V
Operating Temperature：-40°C ~ 85°C
Mounting Type：Surface Mount
Package / Case：24-VFQFN Exposed Pad
Supplier Device Package：24-QFN (4x4)
Receiver Hysteresis：-
Grade：-
Qualification：-

Drivers, Receivers, Transceivers datasheet and documents for USB3318-CP

USB3318-CP

Drivers, Receivers, Transceivers Overview

The USB3318-CP is a Hi-Speed USB 2.0 transceiver (PHY) designed for systems using a 13MHz reference clock. It supports Host, Device, and On-The-Go (OTG) architectures via the ULPI interface. The device operates with an IO voltage range of 1.8V to 3.3V and includes an integrated low jitter PLL for 480Mbps operation. It features flexPWR technology for low current consumption, internal VBUS monitoring, ID resistor detection, and an integrated LDO regulator. The component is housed in a 24-pin QFN package and supports industrial temperatures from -40°C to +85°C.

Drivers, Receivers, Transceivers Feature Summary

Supports OTG protocols including HNP and SRP with internal VBUS comparators
Utilizes wrapper-less design for low latency and legacy UTMI Link compatibility
Includes integrated ESD protection up to ±15kV and cable short-circuit protection
Features Carkit UART mode for non-USB serial data transfers

Drivers, Receivers, Transceivers Applications

Cell Phones
Portable Media Players
GPS Personal Navigation Devices
External Hard Drives
Digital Still and Video Cameras

Drivers, Receivers, Transceivers Procurement Notes

Verify the specific revision level against the latest SMSC datasheet before procurement. Confirm that the ordering suffix matches the required tape and reel quantity of 4000 pieces. Ensure the supplier provides documentation confirming RoHS compliance and halogen-free status as specified in the original manufacturer standards.

Drivers, Receivers, Transceivers Selection Notes

Select this component when board space and interface pin count must be minimized while requiring Hi-Speed USB connectivity. It is suitable for applications needing an integrated LDO regulator to power the PHY from battery or VBUS sources. Consider the 13MHz reference clock requirement and ensure the host controller supports the ULPI protocol.

Drivers, Receivers, Transceivers Part Context

The USB3318 is part of the SMSC USB33xx series of high-speed USB transceivers. It was originally manufactured by Standard Microsystems Corporation (SMSC), which was later acquired by Microchip Technology. This component serves as a bridge between the USB link layer and the physical differential signaling lines, simplifying the design of USB-enabled portable electronics.