0402HP-6N2EJTS

Fixed Inductors Overview

The Delta Electronics/Components 0402HP-6N2EJTS is a fixed surface-mount inductor with an inductance of 6.2 nH and a tolerance of ±5%. It features a drum core, wire-wound construction using ceramic materials and operates without shielding. The component has a DC resistance of 50 mΩ and a rated current of 1.6 A. Its self-resonant frequency is 5.8 GHz, tested at 250 MHz. The package size is 0402 (1.15mm x 0.70mm) with a maximum height of 0.60mm.

Fixed Inductors Feature Summary

• Utilizes a drum core, wire-wound structure for stable low-inductance performance.
• Operates within a wide temperature range from -40°C to 125°C.
• Complies with RoHS3 standards and is REACH exempt.

Fixed Inductors Applications

• RF circuit impedance matching networks
• High-frequency signal filtering applications
• Power distribution decoupling in compact modules

Fixed Inductors Procurement Notes

Verify the specific suffix 'J' indicates the required ±5% tolerance against design schematics. Confirm that the 1.6A rated current meets peak load requirements. Ensure the 0402 footprint dimensions align with PCB layout constraints. Check for RoHS3 compliance documentation if required by project regulations.

Fixed Inductors Selection Notes

Select this component when a very low inductance value near 6.2 nH is necessary for high-speed circuits. The 1.6A current rating supports moderate power handling in small form factors. Consider the 50 mΩ DCR for efficiency calculations in power paths. The unshielded design may require spacing considerations in dense layouts.

Fixed Inductors Part Context

This part belongs to the 0402HP series, designed for high-performance applications requiring precise low-value inductance. The series utilizes ceramic cores to minimize losses at high frequencies. It serves as a standard passive component for RF and microwave circuit implementations where space is limited.

Fixed Inductors Replacement Considerations

The 0402HP-6N2EGTS is a confirmed substitute with identical electrical parameters but a tighter ±2% tolerance. Verify that the stricter tolerance does not impact cost or availability negatively. Both parts share the same physical dimensions and mounting specifications.