1N5236B-TP

Single Zener Diodes Overview

The MCC 1N5236B-TP is a single silicon Zener diode housed in a DO-35 glass axial-lead package. It provides a nominal Zener voltage of 7.5V with a 5% tolerance, tested at a current of 20mA. The device supports a maximum DC power dissipation of 500mW and operates within an ambient temperature range of -55°C to +150°C. Electrical characteristics include a maximum Zener impedance of 6.0 Ohms at the test current and a reverse leakage current not exceeding 3.0µA.

Single Zener Diodes Feature Summary

• Utilizes a hermetically sealed glass axial-lead DO-35 package for robust environmental protection
• Supports high-temperature soldering conditions up to 260°C for ten seconds at the terminals
• Provides precise voltage regulation with a narrow 5% tolerance band on the nominal breakdown voltage

Single Zener Diodes Applications

• General-purpose voltage reference circuits
• Over-voltage protection stages
• DC power supply regulation

Single Zener Diodes Procurement Notes

Verify that the ordering suffix matches the required packaging format, as TP indicates tape and reel quantities. Confirm compliance requirements against specific project standards, noting that lead-free finishes are available via designated suffixes. Ensure procurement channels are authorized distributors to guarantee component authenticity and traceability.

Single Zener Diodes Selection Notes

Select this component when a standard 7.5V reference is required in a through-hole configuration. Evaluate the thermal derating curve if operating near the upper temperature limit, as power dissipation decreases above 50°C. Compare the 6.0 Ohm impedance specification against circuit sensitivity requirements to ensure adequate regulation performance under varying load currents.

Single Zener Diodes Part Context

This part belongs to the 1N5221B through 1N5267B series manufactured by Micro Commercial Components. The series covers a wide voltage range from 2.4V to 75V using the same DO-35 glass package. The 'B' suffix specifically denotes a 5% voltage tolerance, distinguishing it from tighter tolerance variants like the 'C' suffix.

Single Zener Diodes Replacement Considerations

Cross-reference with other manufacturers offering the 1N5236B designation in a DO-35 package. Verify that substitute components match the 7.5V nominal voltage, 500mW power rating, and 5% tolerance specifications to maintain circuit functionality.