1N5335CE3/TR13

Single Zener Diodes Overview

The Microsemi Corporation 1N5335CE3/TR13 is a silicon 5.0-watt Zener diode with a nominal voltage of 3.9 V and ±2% tolerance. It operates within a temperature range of -65°C to +150°C, features an axial T-18 package, and includes a TR suffix for tape and reel packaging.

Single Zener Diodes Feature Summary

• JEDEC registered 1N5333 through 1N5388B series
• RoHS compliant devices available by adding e3 suffix
• Moisture classification Level 1 per IPC/JEDEC J-STD-020B

Single Zener Diodes Applications

• Voltage regulation over broad operating current and temperature ranges
• Withstands high surge stresses in power circuits
• Flexible axial-lead mounting terminals for PCB integration

Single Zener Diodes Procurement Notes

Verify the specific C suffix indicates ±2% tolerance and confirm the TR suffix denotes tape and reel packaging. Ensure the e3 suffix confirms RoHS compliance. Cross-reference datasheet electrical characteristics against circuit requirements before procurement.

Single Zener Diodes Selection Notes

Select this component for applications requiring precise 3.9 V regulation with tight ±2% tolerance. The T-18 package supports high maximum DC currents when adequately heat sunk. Verify thermal resistance parameters match the intended mounting method on FR4 PC boards.

Single Zener Diodes Part Context

This part belongs to the 1N5333B thru 1N5388B JEDEC registered series of axial-leaded 5.0 watt Zeners. The series provides a wide selection from 3.3 to 200 volts with various tolerances identified by specific suffix letters on the part number.

Single Zener Diodes Replacement Considerations

Surface mount equivalents are available as SMBJ5333 to SMBJ5388B or SMBG5333B to SMBG5388B. Military screening options exist using MQ, MX, or MV prefixes for JAN, JANTX, and JANTXV levels respectively.

Single Zener Diodes FAQ

What does the 'C' suffix indicate for this device?

The 'C' suffix identifies a standard voltage tolerance of plus or minus 2%.

How is polarity indicated on the component?

Polarity is indicated by a band on the cathode end; the diode must be operated with the banded end positive with respect to the opposite end.