8J-26.000MEEV-T

$0.53

Description：1.2X1.0 SEAM SEAL MHZ QUARTZ XTA
Series：8J
Mfr：TXC CORPORATION
Package：Tape & Reel (TR)

SKU:d7b194cca570 Category: Crystals Brand: TXC CORPORATION

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

8J-26.000MEEV-T is listed in the Crystals range at ChipApex. The manufacturer field lists TXC CORPORATION. Its product description is 1.2X1.0 SEAM SEAL MHZ QUARTZ XTA. Review the specifications below when checking this part for your BOM.

Crystals specifications for 8J-26.000MEEV-T

Description：1.2X1.0 SEAM SEAL MHZ QUARTZ XTA
Series：8J
Mfr：TXC CORPORATION
Package：Tape & Reel (TR)
Type：MHz Crystal
Frequency：26 MHz
Frequency Stability：±10ppm
Frequency Tolerance：±10ppm
Load Capacitance：8pF
ESR (Equivalent Series Resistance)：100 Ohms
Operating Mode：Fundamental
Operating Temperature：-20°C ~ 70°C
Ratings：-
Mounting Type：Surface Mount
Package / Case：4-SMD, No Lead
Size / Dimension：0.047" L x 0.039" W (1.20mm x 1.00mm)
Height - Seated (Max)：0.013" (0.33mm)

Crystals datasheet and documents for 8J-26.000MEEV-T

8J-26.000MEEV-T

Crystals Overview

The TXC Corporation 8J-26.000MEEV-T is a surface-mount ceramic quartz crystal operating at a nominal frequency of 26 MHz. It features a compact 4-SMD, no-lead package with dimensions of 1.2mm x 1.0mm and a maximum height of 0.33mm. The component provides a frequency stability of ±10ppm at 25°C and ±10ppm over the -20°C to 70°C temperature range. It utilizes an external load capacitance of 8pF, has a maximum equivalent series resistance (ESR) of 150 Ohms, and operates with a drive level of 50 uW.

Crystals Feature Summary

Seam-sealed ceramic construction for environmental protection
Compact 4-pad surface mount footprint
High frequency stability within specified temperature ranges

Crystals Applications

Low-power embedded timing circuits
Consumer electronics clock sources
Industrial control system oscillators

Crystals Procurement Notes

Verify that the specific order matches the 8J series designation to ensure correct ceramic construction and dimensional tolerances. Confirm that the required load capacitance aligns with the 8pF specification in the circuit design. Ensure the operating environment stays within the -20°C to 70°C range for guaranteed ±10ppm stability. Check that the drive level requirements do not exceed the 50 uW limit to prevent frequency drift or damage.

Crystals Selection Notes

Select this component when a small form factor is critical for board space constraints. Choose this part if the application requires a ceramic package rather than a metal can. Consider the 150 Ohm ESR limit when designing the oscillator circuit for proper startup. Evaluate the ±10ppm stability against the system's timing accuracy requirements.

Crystals Part Context

This part belongs to the TXC 8J series of MHz ceramic SMD crystals. The series offers frequencies ranging from 24MHz to 54MHz. These components are designed for applications requiring reliable timing in a minimal footprint. The 8J series distinguishes itself through its seam-sealed ceramic technology.