8W-40.000MBA-T

Oscillators Overview

The TXC Corporation 8W-40.000MBA-T is a standard clock oscillator operating at a frequency of 40 MHz. It utilizes CMOS output format and functions with a supply voltage of 3.3 V. The component features an enable/disable control function for power management. Frequency stability is rated at ±25 ppm across the operating temperature range of -10°C to +70°C. The device is housed in a compact 4-SMD, no lead package with dimensions of 2.5 mm x 2.0 mm.

Oscillators Feature Summary

• CMOS output format compatible with digital logic circuits
• Integrated enable and disable control functionality
• Standard clock oscillator design for timing applications

Oscillators Applications

• General purpose timing reference in electronic systems
• Clock signal generation for microprocessors and FPGAs
• Synchronization in communication equipment

Oscillators Procurement Notes

Verify that the specific application requires a standard XO rather than a TCXO or OCXO given the ±25 ppm stability. Confirm the 3.3 V supply voltage aligns with the system power rails. Ensure the enable/disable pin requirements are supported by the host circuit design before procurement.

Oscillators Selection Notes

Select this component when a low-cost, standard frequency reference is sufficient for non-critical timing paths. The ±25 ppm tolerance makes it suitable for general digital interfaces. Consider thermal environment constraints as the specified range is limited to -10°C to +70°C compared to industrial grades.

Oscillators Part Context

This part belongs to the TXC standard crystal oscillator series designed for surface-mount assembly. It provides a stable square wave output derived from a quartz resonator. The 4-SMD no-lead package facilitates automated pick-and-place manufacturing processes.

Oscillators Replacement Considerations

Direct substitutes must match the 40 MHz frequency, 3.3 V supply, CMOS output, and 4-SMD package. Verify that any alternative maintains the ±25 ppm stability and enable/disable feature if required.