8WJ-7.3728MDJ-T

Oscillators Overview

The 8WJ-7.3728MDJ-T is a standard clock oscillator manufactured by TXC Corporation, operating at a frequency of 7.3728 MHz. It utilizes CMOS output logic and functions as a quartz-based XO (standard) type device. The component supports a supply voltage of 1.8V and features an enable/disable control function. Frequency stability is rated at ±50ppm across the specified operating temperature range of -40°C to +105°C. The physical package is a 4-SMD, no lead configuration with dimensions of 2.5mm x 2.0mm.

Oscillators Feature Summary

• Low jitter and phase noise performance characteristics
• CMOS output signal compatibility
• Enable/Disable functionality for power management

Oscillators Applications

• Standard clock timing applications
• Embedded systems requiring precise frequency references
• Consumer electronics with space constraints

Oscillators Procurement Notes

Verify the specific suffix 'MDJ' against official datasheets to confirm the 1.8V supply requirement and ±50ppm stability rating. Ensure the operating temperature range extends to +105°C as indicated by the part designation. Cross-reference the manufacturer's discontinuation notices or lifecycle status prior to finalizing procurement plans to avoid supply chain interruptions.

Oscillators Selection Notes

Select this component when a small form factor 2.5x2.0mm footprint is required alongside low jitter specifications. The 1.8V supply voltage makes it suitable for modern low-power digital circuits. Consider the enable/disable pin if dynamic power saving is necessary in the design architecture compared to always-on alternatives.

Oscillators Part Context

This oscillator belongs to the 8WJ series from TXC Corporation, which focuses on compact quartz oscillators. The series is designed to replace larger crystal components while providing integrated oscillator functionality. It serves as a direct replacement for discrete crystal and load capacitor combinations in space-constrained PCB layouts.

Oscillators Replacement Considerations

Check for updated suffixes such as MDI or MBD if different voltage levels or stability ratings are acceptable. Verify mechanical compatibility with existing footprints before substituting with other 4-SMD no lead packages.