A12N104

Overview

The A12N104 is a Type 1 hinged-cover electrical enclosure manufactured by Hoffman Enclosures, Inc. Constructed from 16-gauge steel with an ANSI 61 gray polyester powder paint finish, it provides basic protection for internal components. The unit features flush slotted latches operated with a screwdriver and butt hinges. It includes weldnuts for mounting optional panels and pre-drilled mounting holes on the back panel. This enclosure meets UL 50, cUL, NEMA/EEMAC Type 1, and IEC 60529 IP30 standards.

Feature Summary

• Constructed from 16-gauge steel with an ANSI 61 gray polyester powder paint finish inside and out over pretreated surfaces
• Equipped with flush slotted latch operated with a screwdriver and butt hinges
• Includes weldnuts provided for mounting optional panels and mounting holes on the back of the enclosure

Applications

• Applications requiring basic functionality without oil- or dust-tight enclosure requirements
• Indoor electrical component housing where Type 1 protection is sufficient
• Industrial control panels meeting UL 50 and NEMA Type 1 standards

Procurement Notes

Verify the specific dimensional requirements against the official Hoffman datasheet to ensure compatibility with the intended installation space. Confirm that the application environment does not require higher ingress protection ratings such as NEMA 12 or IP66, as this model is rated only for Type 1 and IP30. Ensure that any optional panels or accessories are sourced from compatible Hoffman series products to maintain structural integrity and certification compliance.

Selection Notes

Select the A12N104 when the application demands standard indoor protection against falling objects and limited contact with personnel. This model is suitable for environments free from significant dust, water, or oil exposure. Consider the 16-gauge steel construction for adequate mechanical strength in general-purpose industrial settings. Verify that the internal volume accommodates all necessary components and wiring before finalizing the selection.

Part Context

The A12N104 belongs to the Small Type 1 Hinged-Cover series from Hoffman Enclosures. This series offers size ranges from 6 x 6 x 4-in. to 14 x 12 x 8-in., designed for applications that do not require specialized environmental sealing. The product line is standardized for basic electrical enclosure needs, providing a cost-effective solution for indoor equipment protection under common regulatory standards.

Replacement Considerations

Direct substitutes within the same Hoffman Small Type 1 series include models such as A10N104, A12N124, and A14N124, depending on required dimensions. Cross-manufacturer replacements must match the 16-gauge steel construction, Type 1 rating, and physical footprint to ensure proper fit and compliance with existing mounting configurations.