ADC1010S080HN/C1,5

Analog To Digital Converters (ADC) Overview

The ADC1010S080HN/C1,5 is a single-channel 10-bit pipelined Analog-to-Digital Converter (ADC) from NXP USA Inc., operating at a maximum sampling rate of 80 Msps. It features a 600 MHz input bandwidth and supports differential or single-ended inputs with a configurable full-scale range of 1 V to 2 V peak-to-peak. The device operates on a single 3 V analog supply and includes an integrated Serial Peripheral Interface (SPI) for configuration. Digital outputs are available in CMOS or Low Voltage Differential Signaling (LVDS) Double Data Rate (DDR) formats, ensuring high dynamic performance with a typical Signal-to-Noise Ratio (SNR) of 61.6 dBFS.

Analog To Digital Converters (ADC) Feature Summary

• Pipelined architecture with output error correction guaranteeing zero missing codes across the operating range.
• Configurable digital output interface supporting both CMOS logic levels and LVDS DDR standards.
• Integrated SPI interface enabling programmable full-scale input voltage adjustment from 1 V to 2 V p-p.
• Low power consumption of 430 mW at 80 Msps with dedicated Power-down and Sleep modes.

Analog To Digital Converters (ADC) Applications

• Wireless and wired broadband communications systems
• Portable instrumentation and test equipment
• Imaging systems and ultrasound equipment
• Software defined radio (SDR) platforms

Analog To Digital Converters (ADC) Procurement Notes

Verify the specific suffix HN/C1,5 corresponds to the HVQFN40 package and commercial temperature range (-40°C to +85°C). Confirm that the ordering information matches the 80 Msps variant rather than other speeds in the ADC1010S series. Ensure compatibility with the required digital output standard (CMOS vs LVDS) during procurement planning.

Analog To Digital Converters (ADC) Selection Notes

Select this model when a fixed 80 Msps sampling rate is sufficient, offering lower power dissipation compared to the 125 Msps variant. Consider the HVQFN40 package constraints regarding thermal resistance and PCB layout requirements. Evaluate whether the internal reference capability meets accuracy needs or if an external reference via the VREF pin is necessary for higher precision applications.

Analog To Digital Converters (ADC) Part Context

This component belongs to the ADC1010S series, which includes variants with sampling rates of 65, 80, 105, and 125 Msps. All members share the same HVQFN40 package and pinout, facilitating pin-compatible design upgrades within the same family. The series is designed for high dynamic performance applications requiring low jitter and flexible input/output configurations.

Analog To Digital Converters (ADC) Replacement Considerations

Direct pin-compatible replacements within the same package include the ADC1010S065HN/C1,5, ADC1010S105HN/C1,5, and ADC1010S125HN/C1,5. These alternatives offer different maximum sampling rates but maintain identical electrical interfaces and physical dimensions.