ADC1015S065HN/C1,5

Analog To Digital Converters (ADC) Overview

The ADC1015S065HN/C1 is a single-channel, 10-bit Analog-to-Digital Converter (ADC) from NXP Semiconductors. It utilizes a pipelined architecture with output error correction to ensure zero missing codes across the operating range. The device supports sample rates up to 65 Msps and features an integrated input buffer for consistent impedance. It operates on dual analog supplies of 3 V and 5 V, with a separate digital supply supporting 1.8 V to 3.3 V CMOS or LVDS DDR outputs. Key electrical parameters include a typical Signal-to-Noise Ratio (SNR) of 61.7 dBFS, Spurious-Free Dynamic Range (SFDR) of 86 dBc, and an input bandwidth of 600 MHz. Power dissipation is approximately 580 mW at 65 Msps.

Analog To Digital Converters (ADC) Feature Summary

• Single-channel 10-bit pipelined ADC core with integrated input buffer
• Sample rate up to 65 Msps with guaranteed zero missing codes
• Flexible digital output interface: CMOS or Low Voltage Differential Signalling (LVDS) Double Data Rate (DDR)
• Integrated Serial Peripheral Interface (SPI) for configuration and programmable full-scale input range (1 V to 2 V peak-to-peak)

Analog To Digital Converters (ADC) Applications

• Wireless and wired broadband communications
• Imaging systems and ultrasound equipment
• Software defined radio and spectral analysis

Analog To Digital Converters (ADC) Procurement Notes

Verify the specific suffix HN/C1 corresponds to the HVQFN40 package and commercial temperature range (-40°C to +85°C). Confirm that the ordering code matches the 65 Msps variant, as the ADC1015S series includes higher-speed versions (80, 105, 125 Msps) which are pin-compatible but have different performance specifications. Ensure compatibility with the required power supply voltages (3 V and 5 V analog, 1.8–3.3 V digital).

Analog To Digital Converters (ADC) Selection Notes

Select this component when a single-channel, high-speed 10-bit conversion is required with low jitter tolerance due to the integrated input buffer. Choose the 65 Msps variant if the application signal frequency does not exceed the Nyquist limit for 65 Msps sampling. Consider the LVDS DDR output option if long trace lengths or high noise immunity are necessary, otherwise use CMOS mode for simpler interfacing. Verify thermal management requirements, as power dissipation reaches ~580 mW.

Analog To Digital Converters (ADC) Part Context

The ADC1015S065HN/C1 belongs to the ADC1015S series, which also includes variants with higher maximum sample rates: ADC1015S080 (80 Msps), ADC1015S105 (105 Msps), and ADC1015S125 (125 Msps). All variants in this series share the same HVQFN40 package and pinout, allowing for pin-to-pin substitution if the lower sample rate meets the system requirements. The series is designed for applications requiring high dynamic performance and low power consumption.

Analog To Digital Converters (ADC) Replacement Considerations

Pin-compatible replacements within the same family include ADC1015S080HN/C1, ADC1015S105HN/C1, and ADC1015S125HN/C1. These offer higher sample rates but maintain identical packaging and interface configurations. No other distinct part numbers are confirmed as direct substitutes in the provided documentation.