ASNT6163-KMC

$1,147.50

Description：IC MUX 2:1 24CQFP
Series：-

SKU:316fbd08d391 Category: Analog Switches, Multiplexers, Demultiplexers Brand: ADSANTEC

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

ASNT6163-KMC is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists ADSANTEC. Its product description is IC MUX 2:1 24CQFP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for ASNT6163-KMC

Description：IC MUX 2:1 24CQFP
Series：-
Mfr：ADSANTEC
Package：Bulk
Switch Circuit：-
Multiplexer/Demultiplexer Circuit：2:01
On-State Resistance (Max)：-
Channel-to-Channel Matching (ΔRon)：-
Voltage - Supply, Single (V+)：3.4V ~ 3.8V
Voltage - Supply, Dual (V±)：-
Switch Time (Ton, Toff) (Max)：-
-3db Bandwidth：-
Charge Injection：-
Channel Capacitance (CS(off), CD(off))：-
Current - Leakage (IS(off)) (Max)：-
Crosstalk：-
Operating Temperature：-
Mounting Type：Surface Mount
Package / Case：24-CFlatPack
Supplier Device Package：24-CQFP (8x8)
Number of Circuits：-
Grade：-
Qualification：-

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for ASNT6163-KMC

ASNT6163-KMC

Analog Switches, Multiplexers, Demultiplexers Overview

The ASNT6163-KMC is a temperature-stabilized analog signal selector fabricated in SiGe technology. It operates from DC to 32 GHz with two differential CML-type input ports and one differential output port, delivering a nominal gain of 0 dB. The device functions as a 1-of-2 selector or a two-channel mixer/adder. It supports single +3.6 V or -3.6 V power supplies with 700 mW consumption in selector mode. Key electrical parameters include a 1 dB compression point of 0 dBm, bandwidth up to 32 GHz (-3 dB), and low jitter over the industrial temperature range.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Temperature-stabilized broadband operation across DC to 32 GHz
Configurable dual-mode functionality for signal selection or mixing
Integrated on-chip 50 Ohm termination for CML logic interfaces
Low jitter performance with limited variation over industrial temperatures

Analog Switches, Multiplexers, Demultiplexers Applications

High-speed optical communication systems
Broadband test and measurement equipment
Signal routing in complex RF architectures

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific ordering suffix against official manufacturer documentation to confirm package type and pinout configuration. Ensure that the procurement channel provides valid traceability and authenticity certificates. Confirm RoHS compliance status per 2011/65/EU standards before finalizing acquisition.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when designing high-speed systems requiring precise analog signal routing or combining. Evaluate the thermal management requirements due to the custom CQFP package and center heat slug. Verify compatibility with the required CML interface levels and AC/DC coupling configurations for the target application environment.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the ASNT series of advanced analog signal processing components developed by Advanced Science And Novel Technology Company, Inc. These devices utilize SiGe fabrication technology to achieve high performance and reliability in demanding RF environments.

Analog Switches, Multiplexers, Demultiplexers Replacement Considerations

Publicly confirmed substitute part numbers are not available in the provided documentation. Consult the manufacturer directly for potential cross-references or updated product line replacements.

Analog Switches, Multiplexers, Demultiplexers FAQ

How does the ASNT6163-KMC switch between selector and mixer modes?

The device switches modes via the external low-speed control port 'on2'. Setting 'on2' to vcc activates the mixer/adder mode, while leaving it at vee defaults to the 1-of-2 selector mode.

What are the power supply options for this IC?

The IC can operate with either a negative supply (vcc = 0.0 V, vee = -3.6 V) or a positive supply (vcc = +3.6 V, vee = 0.0 V). Different PCB layouts are required for each configuration.