BAJ0BC0T

$1.91

Description：IC REG LINEAR 10V 1A TO220FP
Series：-
Mfr：Rohm Semiconductor
Package：Tube

SKU:0bb148e0b09f Category: Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Brand: Rohm Semiconductor

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

BAJ0BC0T is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists Rohm Semiconductor. Its product description is IC REG LINEAR 10V 1A TO220FP. Review the specifications below when checking this part for your BOM.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators specifications for BAJ0BC0T

Description：IC REG LINEAR 10V 1A TO220FP
Series：-
Mfr：Rohm Semiconductor
Package：Tube
Output Configuration：Positive
Output Type：Fixed
Number of Regulators：1
Voltage - Input (Max)：16V
Voltage - Output (Min/Fixed)：10V
Voltage - Output (Max)：-
Voltage Dropout (Max)：-
Current - Output：1A
Current - Quiescent (Iq)：0.5 mA
Current - Supply (Max)：900 µA
PSRR：-
Control Features：-
Protection Features：Over Current, Over Temperature
Operating Temperature：-40°C ~ 105°C
Mounting Type：Through Hole
Package / Case：TO-220-3 Full Pack
Supplier Device Package：TO-220FP
Grade：-
Qualification：-

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators datasheet and documents for BAJ0BC0T

BAJ0BC0T

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Overview

The BAJ0BC0T is a fixed positive LDO regulator with a 10V output, housed in a TO-220FP-3 package. It delivers a maximum output current of 1A with an accuracy of ±2.0% at 25°C. The device withstands up to 18V input and operates within a -40°C to 105°C range. Key electrical parameters include a typical dropout voltage of 0.3V at 0.2A, ripple rejection of 55dB, and load regulation of 35mV from 0 to 1A. It requires a 22µF output capacitor.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Feature Summary

Low saturation-voltage type with PNP output
Built-in overcurrent protection circuit
Built-in thermal shutdown circuit

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Applications

Local power supplies for secondary LDO regulator series
General purpose voltage regulation requiring 10V fixed output
Applications needing high reliability under short-circuit conditions

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Procurement Notes

Verify the specific suffix 'T' against the manufacturer's official ordering information to confirm tube packaging details. Confirm RoHS compliance status as indicated in the latest datasheet revision. Ensure the TO-220FP-3 pinout matches the target PCB footprint design requirements before finalizing procurement orders.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Selection Notes

Select this component when a stable 10V output is required with a maximum load of 1A. Consider its low dropout characteristic for efficiency in applications where input voltage is close to the output level. Verify that the operating temperature range of -40°C to 105°C meets the environmental constraints of the intended system deployment.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Part Context

This part belongs to the BA□□BC0 series of secondary LDO regulators designed for local power supplies. The series offers a broad output voltage range from 1.5V to 10V with ±2% accuracy. These regulators are characterized by their robust protection features and suitability for general-purpose electronic circuits requiring reliable voltage regulation.