DG201ADJ

$2.77

Description：IC SWITCH SPST-NCX4 200OHM 16DIP
Series：-

SKU:9ff4f43dcbe7 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

DG201ADJ is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH SPST-NCX4 200OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for DG201ADJ

Description：IC SWITCH SPST-NCX4 200OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube,Tube
Switch Circuit：SPST - NC
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：200Ohm
Channel-to-Channel Matching (ΔRon)：-
Voltage - Supply, Single (V+)：-
Voltage - Supply, Dual (V±)：±4.5V ~ 18V
Switch Time (Ton, Toff) (Max)：600ns, 450ns
-3db Bandwidth：-
Charge Injection：20pC
Channel Capacitance (CS(off), CD(off))：5pF, 5pF
Current - Leakage (IS(off)) (Max)：5nA
Crosstalk：-90dB @ 100kHz
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：4

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for DG201ADJ

DG201ADJ

Analog Switches, Multiplexers, Demultiplexers Overview

The DG201ADJ is a quad single-pole single-throw (SPST) normally closed analog switch manufactured by Analog Devices Inc./Maxim Integrated. It operates on dual power supplies ranging from ±4.5V to ±18V and features a 16-pin Plastic DIP package with an operating temperature range of -40°C to +85°C. The device guarantees a maximum turn-on time of 600ns and a maximum turn-off time of 450ns. Electrical characteristics include a maximum drain-source ON-resistance of 200 Ohms at ±15V supply, maximum source OFF-leakage current of 5nA, and maximum positive supply current of 0.1mA.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Normally closed SPST configuration with guaranteed break-before-make switching
Operates without the third VL supply required by original manufacturer products
Nonlatching behavior when power supplies are disconnected while input signals remain connected
Compatible with both CMOS and TTL logic control inputs

Analog Switches, Multiplexers, Demultiplexers Applications

Winchester Disk Drives
Test Equipment
Communications Systems
PBX and PABX systems
Guidance and Control Systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific ordering suffix against official documentation to confirm the exact package type and temperature rating. Confirm RoHS compliance status through the manufacturer's material declaration. Ensure the component matches the intended voltage and current requirements for the target application before procurement.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component for applications requiring normally closed signal paths and low power consumption in portable designs. Compare switching speeds against the DG211 variant if faster operation is needed. Verify that the ±4.5V to ±18V supply range aligns with the system architecture and that the 16-pin PDIP package fits the PCB layout constraints.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the DG201A/DG211 family of quad SPST CMOS analog switches. The DG201A series is distinguished from the DG211 primarily by its faster switching speeds. Both devices share similar electrical characteristics but differ in turn-on and turn-off times, making the DG201A suitable for applications requiring quicker signal transitions.