SEARCH
— IC芯片 | 连接器 | 传感器 | 被动器件 —
DG2737DN-T1-E4 is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Vishay Siliconix. Its product description is IC SWITCH SPDT X 1 8OHM 8MINIQFN. Review the specifications below when checking this part for your BOM.
The DG2737DN-T1-E4 is a dual single-pole single-throw (SPST) analog switch manufactured by Vishay Siliconix. It operates on a single supply voltage ranging from 2.3 V to 4.3 V and features a typical on-resistance of 6 Ω at 3 V. The device provides a -3 dB bandwidth of 720 MHz, with maximum turn-on and turn-off times of 70 ns and 60 ns respectively across the full temperature range. It utilizes a miniQFN-8L package measuring 1.4 x 1.4 mm.
Verify component authenticity through authorized distributors or direct manufacturer channels. Confirm RoHS compliance status and lead-free termination specifications prior to integration. Validate that the specific ordering suffix matches the required package and environmental ratings for the intended application environment.
Select this component when a compact dual-channel switch is required for low-voltage logic interfacing. Ensure the operating supply voltage remains within the 2.3 V to 4.3 V range. Consider the 6 Ω on-resistance and 300 mA continuous current limits against the specific load requirements of the target circuit design.
This part belongs to the DG2737/38/39 family of sub-micro CMOS analog switches. It shares identical pinouts and mechanical dimensions with the DG2738 and DG2739 variants, differing primarily in internal logic control configurations. The series is designed specifically for portable electronics where size and power efficiency are critical constraints.
Direct functional equivalents within the same package include the DG2738DN-T1-E4 and DG2739DN-T1-E4. Verify logic input requirements as these variants utilize different control schemes despite sharing the same electrical parameters and physical form factor.
Explore related parts through Interface, Integrated Circuits (ICs), all product categories, ChipApex homepage.
DG2737DN-T1-E4 is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Vishay Siliconix. Its product description is IC SWITCH…
Read More
Learn how to use ferrite beads for noise filtering. Check impedance, DC bias, placement, resonance and load-step behavior before selecting a part.
Read More
Find out when a bare shock switch needs a pull resistor, when an MCU internal pull-up is enough, and why sensor modules and piezo…
Read More
DG2737DN-T1-E4 is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Vishay Siliconix. Its product description is IC SWITCH…
Read More
DG2737DN-T1-E4 is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Vishay Siliconix. Its product description is IC SWITCH…
Read More
Choose a vibration sensor for machine monitoring. Compare sensing methods, bandwidth, noise and mounting, then define the signal-chain requirements.
Read More
Understand UART protocol framing, baud rate and electrical interfaces. Learn 8N1 timing, TX/RX wiring, buffering and practical troubleshooting steps.
Read More
DG2737DN-T1-E4 is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Vishay Siliconix. Its product description is IC SWITCH…
Read More
DG2737DN-T1-E4 is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Vishay Siliconix. Its product description is IC SWITCH…
Read More
DG2737DN-T1-E4 is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Vishay Siliconix. Its product description is IC SWITCH…
Read More
Compare Hall, shunt, current transformer and Rogowski sensing. Check AC/DC capability, accuracy, isolation, heat and response before selecting a sensor.
Read More
Understand tactile switches, PCB and keyboard differences, four-pin wiring, debounce, force, travel and replacement checks for reliable control inputs.
Read More