DG407EWI+

$22.47

Description：IC MUX DUAL 8:1 100OHM 28SOIC
Series：-

SKU:d2239a4eca0e Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

DG407EWI+ is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC MUX DUAL 8:1 100OHM 28SOIC. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for DG407EWI+

Description：IC MUX DUAL 8:1 100OHM 28SOIC
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：-
Multiplexer/Demultiplexer Circuit：8:01
On-State Resistance (Max)：100Ohm
Channel-to-Channel Matching (ΔRon)：1.5Ohm
Voltage - Supply, Single (V+)：5V ~ 30V
Voltage - Supply, Dual (V±)：±4.5V ~ 20V
Switch Time (Ton, Toff) (Max)：200ns, 150ns
-3db Bandwidth：-
Charge Injection：2pC
Channel Capacitance (CS(off), CD(off))：8pF, 65pF
Current - Leakage (IS(off)) (Max)：500pA
Crosstalk：-92dB @ 100kHz
Operating Temperature：-40°C ~ 85°C (TA)
Mounting Type：Surface Mount
Package / Case：28-SOIC (0.295", 7.50mm Width)
Supplier Device Package：28-SOIC
Number of Circuits：2

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for DG407EWI+

DG407EWI+

Analog Switches, Multiplexers, Demultiplexers Overview

The DG407EWI+ is a dual 8-channel CMOS analog multiplexer in a 28-pin Wide SOIC package. It operates with single supplies from +5V to +30V or dual supplies from ±4.5V to ±20V. Key electrical specifications include a maximum on-resistance of 175Ω, an on-resistance matching of 8Ω, and a flatness of 9Ω. The device features a maximum charge injection of 15pC, input leakage current under 5nA at +85°C, and low power consumption of 1.25mW. Transition time is typically 300ns, with enable turn-on/off times up to 600ns and 300ns respectively. It supports rail-to-rail signal handling and includes ESD protection exceeding 2000V.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Pin-compatible plug-in upgrade for industry standard DG406/DG407
Guaranteed low charge injection and low on-resistance
Digital input controls compatible with TTL and CMOS logic levels
Rail-to-rail signal handling capability

Analog Switches, Multiplexers, Demultiplexers Applications

Sample-and-Hold Circuits
Test Equipment
Guidance and Control Systems
Data-Acquisition Systems

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific suffix 'EWI+' corresponds to the 28-pin Wide SOIC package and -40°C to +85°C temperature range. Confirm RoHS compliance status as indicated by the '+' designation. Ensure the ordering code matches the exact manufacturer part number to avoid pinout mismatches with legacy devices.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when a dual 8-channel configuration is required instead of a single 16-channel unit. Verify that the 175Ω maximum on-resistance meets system requirements. Check if the Wide SOIC footprint fits the PCB layout constraints compared to DIP or PLCC alternatives.

Analog Switches, Multiplexers, Demultiplexers Part Context

This device belongs to the DG406/DG407 series of improved CMOS analog multiplexers. It serves as a direct replacement for older DG506A/DG507A series devices while offering enhanced performance metrics such as lower on-resistance and faster switching speeds.