DG509ACJ

Description：IC SWITCH SP4T X 2 450OHM 16DIP
Series：-

SKU:889e9b31a16a Category: Analog Switches, Multiplexers, Demultiplexers Brand: Analog Devices Inc./Maxim Integrated

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

DG509ACJ is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Analog Devices Inc./Maxim Integrated. Its product description is IC SWITCH SP4T X 2 450OHM 16DIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for DG509ACJ

Description：IC SWITCH SP4T X 2 450OHM 16DIP
Series：-
Mfr：Analog Devices Inc./Maxim Integrated
Package：Tube
Switch Circuit：SP4T
Multiplexer/Demultiplexer Circuit：4:01
On-State Resistance (Max)：450Ohm
Channel-to-Channel Matching (ΔRon)：27Ohm
Voltage - Supply, Single (V+)：-
Voltage - Supply, Dual (V±)：±4.5V ~ 18V
Switch Time (Ton, Toff) (Max)：1.5µs, 1µs
-3db Bandwidth：-
Charge Injection：-
Channel Capacitance (CS(off), CD(off))：5pF, 12pF
Current - Leakage (IS(off)) (Max)：1nA
Crosstalk：-
Operating Temperature：0°C ~ 70°C (TA)
Mounting Type：Through Hole
Package / Case：16-DIP (0.300", 7.62mm)
Supplier Device Package：16-PDIP
Number of Circuits：2

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for DG509ACJ

DG509ACJ

Analog Switches, Multiplexers, Demultiplexers Overview

The DG509ACJ is a monolithic CMOS analog multiplexer featuring two differential 4-channel (2-of-8) switching circuits. It operates on dual supplies ranging from ±4.5V to ±18V with an analog signal range of -15V to +15V. The device guarantees break-before-make switching and latchup-proof construction. Key electrical parameters include a maximum drain-source on-resistance of 450Ω at ±15V, off-isolation of 68dB at 500kHz, and supply currents of 0.2mA maximum. Logic inputs are compatible with TTL and CMOS standards.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Monolithic CMOS design ensuring low power consumption
Guaranteed break-before-make switching for signal integrity
Latchup-proof construction allowing operation with powered-off supplies
TTL and CMOS compatible logic and enable inputs

Analog Switches, Multiplexers, Demultiplexers Applications

Data-acquisition systems
Signal routing
Control systems
Aircraft heads-up displays

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the specific ordering suffix against the manufacturer's current documentation to confirm package type and temperature range. Confirm RoHS compliance status as standard plastic DIP packages may differ from lead-free variants. Check for obsolescence notices or lifecycle changes before finalizing procurement plans.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when differential signal routing is required within a single IC. Ensure the application voltage stays within the ±4.5V to ±18V operational range. Verify that the 450Ω maximum on-resistance meets system requirements compared to lower-resistance alternatives if signal loss is critical.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the DG508A/DG509A family of monolithic CMOS analog multiplexers. While the DG508A provides a single-ended 8-channel configuration, the DG509ACJ specifically offers two differential channels. Both share identical pinouts and electrical characteristics regarding switching speed and leakage.