DSR10F600P

Single Diodes Overview

The DSR10F600P is a 600V, 10A Hyperfast Rectifier designed for power factor correction (PFC) applications. It features a peak repetitive reverse voltage of 600V and an average rectified output current of 10A. The typical forward voltage drop is 2.5V at +25°C, with a maximum surge current capability of 90A. Key electrical parameters include a typical reverse recovery time of 15ns and a reverse recovery charge of 43nC at +25°C. The device operates within a junction temperature range up to +175°C.

Single Diodes Feature Summary

• Very fast switching characteristics reduce MOSFET PFC switching losses
• Soft switching ensures ringing and EMI are reduced
• Low QRR and IRM minimize boost diode recovery losses

Single Diodes Applications

• Boost diode in power factor correction (PFC) circuits
• High Power SMPS
• Servers and Telecom Equipment
• Flat-Panel TVs

Single Diodes Procurement Notes

Verify the specific package variant during procurement, as the datasheet lists TO220AC Type E as available and Type HE as a future release. Confirm RoHS compliance and Halogen/Antimony-free status against the latest manufacturer definitions. Ensure thermal management aligns with the specified heat sink dimensions for rated current operation.

Single Diodes Selection Notes

Select this component for hard switching and continuous conduction mode (CCM) PFC circuits requiring soft switching capabilities. Evaluate thermal resistance requirements based on whether the device will be mounted on a standard heat sink or operate free-standing. Consider the low reverse recovery charge for high-frequency efficiency optimization.

Single Diodes Part Context

This part belongs to Diodes Incorporated's DSR10F series of hyperfast rectifiers. These components are engineered specifically for high-efficiency power conversion topologies where rapid switching and minimal recovery losses are critical for system performance and electromagnetic compatibility.

Single Diodes Replacement Considerations

Consult Diodes Incorporated documentation for direct equivalents. Verify that any substitute maintains the 600V rating, 10A current capacity, and compatible TO220AC footprint.