Instrumentation, Op Amps, Buffer Amps EL5374IUZ-T7 product image

EL5374IUZ-T7

  • Description:IC OPAMP DIFF 3 CIRC 28SSOP/QSOP
  • Series:-
  • Mfr:Renesas Electronics Corporation
  • Package:Tape & Reel (TR)

SKU:a12171c635a1 Category: Brand:

ChipApex WhatsApp

Consult the customer manager about the wholesale price.

consultation hotline:86-132-6715-2157

email:[email protected]
Contact the product manager for consultation. One-stop consultation is available.


Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Submitting!
Submission successful!
Submission failed!
Email error!
Phone number error!

EL5374IUZ-T7 is listed in the Instrumentation, Op Amps, Buffer Amps range at ChipApex. The manufacturer field lists Renesas Electronics Corporation. Its product description is IC OPAMP DIFF 3 CIRC 28SSOP/QSOP. Review the specifications below when checking this part for your BOM.

Instrumentation, Op Amps, Buffer Amps specifications for EL5374IUZ-T7

  • Description:IC OPAMP DIFF 3 CIRC 28SSOP/QSOP
  • Series:-
  • Mfr:Renesas Electronics Corporation
  • Package:Tape & Reel (TR)
  • Amplifier Type:Differential
  • Number of Circuits:3
  • Output Type:Differential
  • Slew Rate:850V/µs
  • Gain Bandwidth Product:200 MHz
  • Current - Input Bias:14 µA
  • Voltage - Input Offset:2.2 mV
  • Current - Supply:12.5mA (x3 Channels)
  • Current - Output / Channel:60 mA
  • Voltage - Supply Span (Min):4.75 V
  • Voltage - Supply Span (Max):11 V
  • Operating Temperature:-40°C ~ 85°C
  • Mounting Type:Surface Mount
  • Package / Case:28-SSOP (0.154", 3.90mm Width)
  • Supplier Device Package:28-SSOP/QSOP
  • -3db Bandwidth:550 MHz

Instrumentation, Op Amps, Buffer Amps datasheet and documents for EL5374IUZ-T7

EL5374IUZ-T7

Instrumentation, Op Amps, Buffer Amps Overview

The EL5374IUZ-T7 is a triple-channel high bandwidth differential amplifier manufactured by Renesas Electronics Corporation. It features fully differential inputs, outputs, and feedback with a gain bandwidth product of 200 MHz and a -3dB bandwidth of 550 MHz at unity gain. The device operates on single 5V or dual ±5V supplies within a voltage range of 4.75V to 11V. It provides a maximum output current of 60mA per channel and includes an enable pin for power-down functionality. The component is housed in a 28-lead QSOP package and supports operation from -40°C to +85°C.

Instrumentation, Op Amps, Buffer Amps Feature Summary

  • Triple-channel architecture with fully differential signal paths
  • Integrated enable pin for low-power shutdown control
  • Internal short-circuit protection for overload safety
  • Adjustable output common-mode voltage via dedicated reference pins

Instrumentation, Op Amps, Buffer Amps Applications

  • Driving twisted-pair lines in component video applications
  • Differential line driver circuits
  • VGA transmission over twisted-pair cables
  • ADSL/HDSL driver interfaces
  • Single-ended to differential amplification

Instrumentation, Op Amps, Buffer Amps Procurement Notes

Verify the specific suffix 'T7' indicates tape and reel packaging as defined in manufacturer technical briefs. Confirm RoHS compliance status through official documentation. Check for moisture sensitivity level classifications prior to soldering. Ensure supply voltage limits are respected during integration. Validate that the 28-lead QSOP footprint matches the design schematic.

Instrumentation, Op Amps, Buffer Amps Selection Notes

Select this component when triple-channel differential signaling is required. The EL5374 differs from the EL5174 by offering three independent channels instead of one. Use this part for applications needing adjustable gain greater than one via external feedback resistors. Consider the EL5373 if a fixed gain of two is sufficient. Verify thermal dissipation requirements for the QSOP package under load.

Instrumentation, Op Amps, Buffer Amps Part Context

This device belongs to the EL5374 series of wide bandwidth, low power differential drivers. It is designed for high-frequency analog signal processing where noise immunity is critical. The family targets video and telecommunications infrastructure. The EL5374 complements single-channel variants like the EL5174 for multi-line systems.

Instrumentation, Op Amps, Buffer Amps Replacement Considerations

The datasheet recommends the EL5373IUZ as a replacement for the standard EL5374IUZ variant. The EL5373 provides a fixed gain of two, whereas the EL5374 allows user-settable gain.

EL5374IUZ-T7EL5374IUZ-T7

Click on the inquiry

Recent News