FMSMA1018-50PK

$90.25

Description：2400- 2500/ 5150-5825 MHZ, 4.8/3
Series：-
Mfr：Fairview Microwave
Package：Bulk

SKU:45992e405275 Category: RF Antennas Brand: Fairview Microwave

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

FMSMA1018-50PK is listed in the Antennas RF range at ChipApex. The manufacturer field lists Fairview Microwave. Its product description is 2400- 2500/ 5150-5825 MHZ, 4.8/3. Review the specifications below when checking this part for your BOM.

Antennas RF specifications for FMSMA1018-50PK

Description：2400- 2500/ 5150-5825 MHZ, 4.8/3
Series：-
Mfr：Fairview Microwave
Package：Bulk
RF Family/Standard：General ISM, WiFi
Frequency Group：UHF (2GHz ~ 3GHz), SHF (f > 4GHz)
Frequency (Center/Band)：2.45GHz, 5.487GHz
Frequency Range：2.4GHz ~ 2.5GHz, 5.15GHz ~ 5.825GHz
Antenna Type：Stamped Metal
Number of Bands：2
VSWR：2
Return Loss：-
Gain：4.8dBi, 3.7dBi
Features：Cable - 378.46mm
Termination：I-PEX
Ingress Protection：-
Grade：-
Qualification：-
Mounting Type：Solder
Height (Max)：0.390" (9.91mm)
Applications：802.11a/n/ac/ax, IoT, ISM, M2M, Wi-Fi
Power - Max：1 W

Antennas RF datasheet and documents for FMSMA1018-50PK

FMSMA1018-50PK

Antennas RF Overview

The FMSMA1018-50PK is a stamped metal embedded antenna designed for access point and router applications. It features linear polarization with isotropic radiation patterns. The unit operates across two frequency bands: 2400–2500 MHz and 5150–5825 MHz. Gain specifications are 4.8 dBi for the lower band and 3.7 dBi for the upper band. The connector interface is IPEX. This product is supplied in a 50-pack configuration.

Antennas RF Feature Summary

Stamped metal construction for compact embedding
Dual-band operation covering 2.4 GHz and 5 GHz ranges
Linear polarization with isotropic radiation characteristics

Antennas RF Applications

Embedded antennas for wireless access points
Integrated antennas for wireless routers
Compact IoT device connectivity modules

Antennas RF Procurement Notes

Verify the specific IPEX connector generation compatibility with your host PCB layout before integration. Confirm that the dual-band gain requirements align with your system's link budget calculations. Ensure the physical dimensions of the stamped metal housing fit within the designated enclosure constraints. Validate regulatory compliance for the target deployment region.

Antennas RF Selection Notes

Select this component when a low-profile, embedded solution is required for both 2.4 GHz and 5 GHz Wi-Fi standards. The stamped metal design offers a cost-effective alternative to machined housings while maintaining structural integrity. Consider the IPEX interface for direct board-to-antenna connection without additional cabling. Evaluate the 4.8/3.7 dBi gain profile against range requirements.

Antennas RF Part Context

This part belongs to Fairview Microwave's embedded antenna portfolio, specifically targeting consumer networking hardware. Unlike discrete cable assemblies, these units are designed for direct integration into device casings. The 50-pack format supports high-volume manufacturing processes for router and AP producers.