H11AA1SD

Description：OPTOISO 5.3KV TRANS W/BASE 6-SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)

SKU:3059c398c44f Category: Transistor, Photovoltaic Output Optoisolators Brand: onsemi

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

H11AA1SD is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists onsemi. Its product description is OPTOISO 5.3KV TRANS W/BASE 6-SMD. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for H11AA1SD

Description：OPTOISO 5.3KV TRANS W/BASE 6-SMD
Series：-
Mfr：onsemi
Package：Tape & Reel (TR)
Number of Channels：1
Voltage - Isolation：5300Vrms
Current Transfer Ratio (Min)：20% @ 10mA
Current Transfer Ratio (Max)：-
Turn On / Turn Off Time (Typ)：-
Rise / Fall Time (Typ)：-
Input Type：AC, DC
Output Type：Transistor with Base
Voltage - Output (Max)：30V
Current - Output / Channel：-
Voltage - Forward (Vf) (Typ)：1.2V
Current - DC Forward (If) (Max)：100 mA
Vce Saturation (Max)：400mV
Operating Temperature：-55°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：6-SMD, Gull Wing
Supplier Device Package：6-SMD

Transistor, Photovoltaic Output Optoisolators datasheet and documents for H11AA1SD

H11AA1SD

Transistor, Photovoltaic Output Optoisolators Overview

The onsemi H11AA1SD is a single-channel MOSFET output optocoupler housed in a surface-mount SMD-DIP-6 package. It provides electrical isolation with an insulation voltage of 5300 Vrms. The device features a Photo MOSFET output type and operates within a temperature range of -55°C to +100°C. Key electrical parameters include a forward current of 16 mA, a forward voltage of 1.75 V, and a reverse voltage of 5 V. Power dissipation is rated at 300 mW.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Provides high-voltage electrical isolation between input and output circuits
Utilizes a bilateral analog FET output for signal transmission
Designed for surface-mount assembly in compact form factors

Transistor, Photovoltaic Output Optoisolators Applications

Industrial control systems requiring galvanic isolation
Analog signal switching applications
Power supply feedback loops

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify component authenticity through authorized distributors or direct manufacturer channels. Confirm RoHS compliance status and specific lot traceability upon receipt. Ensure storage conditions meet moisture sensitivity level requirements to maintain reliability before soldering. Check for obsolescence notices as availability may be limited.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when high isolation voltage and low leakage are required for analog signals. Compare against alternatives based on package compatibility and thermal performance. Ensure the forward current limits are respected in the circuit design to prevent damage. Verify that the operating temperature range aligns with the final application environment.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the H11 series of optocouplers from onsemi, designed for general-purpose isolation tasks. The SD suffix typically indicates a specific tape and reel packaging configuration for automated assembly. It serves as a discrete solution for isolating low-power control signals from higher voltage domains.