HCPL-0466-060E

Logic Output Optoisolators Overview

The HCPL-0466-060E is a single-channel logic output optocoupler from the Broadcom HCPL series. It features an open collector output with Schottky clamping for high-speed digital isolation. The device provides a propagation delay of 650 ns and supports data rates up to 1 MBd. Key electrical parameters include a maximum forward voltage of 1.8 V, a maximum continuous output current of 15 mA, and a maximum input current of 20 mA. It offers an insulation voltage of 3750 Vrms and a common-mode transient immunity of 15 kV/µs. The unit operates within a temperature range of -40°C to +100°C and is housed in an 8-pin SOIC package.

Logic Output Optoisolators Feature Summary

• Integrates Schottky-clamped open-collector outputs to ensure fast switching speeds and stable logic levels.
• Provides high common-mode transient immunity of 15 kV/µs for reliable noise rejection in industrial environments.
• Supports data transmission rates up to 1 MBd with a typical propagation delay of 650 ns.

Logic Output Optoisolators Applications

• Intelligent Power Module (IPM) interface circuits
• High-speed digital signal isolation between microcontrollers and peripheral devices
• Industrial control systems requiring robust noise immunity

Logic Output Optoisolators Procurement Notes

Verify the specific suffix '060E' against the manufacturer's latest datasheet to confirm pinout compatibility and RoHS status. Ensure the selected variant matches the required operating temperature range and packaging type. Cross-reference safety certifications such as UL and CSA if used in regulated equipment. Confirm that the open-collector output configuration aligns with the destination circuit's pull-up requirements.

Logic Output Optoisolators Selection Notes

Select this component when high-speed digital isolation is required alongside strong noise immunity. The 15 kV/µs CMTI rating makes it suitable for noisy power electronics environments. Consider the open-collector output structure, which requires external pull-up resistors, when designing the receiving side circuitry. Verify that the 1 MBd speed meets the system's timing constraints compared to slower standard optocouplers.

Logic Output Optoisolators Part Context

This part belongs to the HCPL family of intelligent power module interface optocouplers. It is designed specifically for applications demanding fast response times and high reliability. The device bridges low-voltage logic circuits with higher voltage power stages, providing galvanic isolation while maintaining signal integrity at high frequencies.

Logic Output Optoisolators Replacement Considerations

Public confirmed substitute part numbers are not available in the provided documentation. Users should consult official Broadcom replacement guides or contact technical support for verified equivalents.