HCPL-2730-500E

$3.34

Description：OPTOISO 3.75KV 2CH DARL 8-DIP GW
Series：-
Mfr：Broadcom Limited
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:0d503d61c063 Category: Transistor, Photovoltaic Output Optoisolators Brand: Broadcom Limited

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

HCPL-2730-500E is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Broadcom Limited. Its product description is OPTOISO 3.75KV 2CH DARL 8-DIP GW. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for HCPL-2730-500E

Description：OPTOISO 3.75KV 2CH DARL 8-DIP GW
Series：-
Mfr：Broadcom Limited
Package：Tape & Reel (TR),Cut Tape (CT)
Number of Channels：2
Voltage - Isolation：3750Vrms
Current Transfer Ratio (Min)：300% @ 1.6mA
Current Transfer Ratio (Max)：2600% @ 1.6mA
Turn On / Turn Off Time (Typ)：5µs, 10µs
Rise / Fall Time (Typ)：-
Input Type：DC
Output Type：Darlington
Voltage - Output (Max)：7V
Current - Output / Channel：60mA
Voltage - Forward (Vf) (Typ)：1.4V
Current - DC Forward (If) (Max)：12 mA
Vce Saturation (Max)：100mV
Operating Temperature：0°C ~ 70°C
Mounting Type：Surface Mount
Package / Case：8-SMD, Gull Wing
Supplier Device Package：8-DIP Gull Wing

Transistor, Photovoltaic Output Optoisolators datasheet and documents for HCPL-2730-500E

HCPL-2730-500E

Transistor, Photovoltaic Output Optoisolators Overview

The HCPL-2730-500E is a high-speed optocoupler manufactured by Broadcom Limited. It features two independent channels with GaAsP LEDs coupled to photodarlington detectors. Key electrical parameters include a data rate of 100 kBd, an isolation voltage of 3750 Vrms, and a current transfer ratio of 1600%. The device supports a maximum forward current of 20 mA with a typical forward voltage of 1.4V. Output characteristics specify a collector current of 60 mA and a saturation voltage of 100 mV. It operates within a temperature range of 0°C to +70°C and is housed in a PDIP-8 package.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Dual-channel architecture with integrated high-gain photodarlington output detectors
High common-mode rejection capability for noise immunity
Optical coupling between separated GaAsP LED input and detector output

Transistor, Photovoltaic Output Optoisolators Applications

Industrial communication bus interfaces
Isolated signal transmission in noisy environments
Microprocessor system interconnects requiring galvanic isolation

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix designation against official datasheets to confirm pinout and packaging variations. Confirm RoHS compliance status as manufacturing updates may alter environmental declarations. Check for obsolescence notices or lifecycle changes directly from Broadcom documentation before finalizing procurement plans.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when dual-channel isolation with moderate speed requirements is necessary. The photodarlington output provides high gain suitable for direct logic interfacing without additional amplification. Ensure the 3750 Vrms isolation rating meets the safety requirements of the target application circuit design.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the HCPL series of high-speed optocouplers from Broadcom. It is designed for applications requiring reliable electrical isolation between low-voltage control circuits and higher-voltage power stages. The series emphasizes robust performance in industrial and commercial electronic systems.