HCPL-4506#060

Logic Output Optoisolators Overview

The HCPL-4506#060 is a single-channel logic output optocoupler from Broadcom, housed in an 8-pin PDIP package. It features a GaAsP LED input and an open-collector output with Schottky clamping. Key electrical parameters include a maximum propagation delay of 650 ns, a typical rise/fall time of 5 ns, and a minimum common-mode transient immunity (CMTI) of 15 kV/µs at VCM=1500V. The device supports a data rate of 1 Mbps, operates within a temperature range of -40°C to +100°C, and provides an isolation voltage of 3750 Vrms. It includes an internal 20kΩ pull-up resistor on pins 6 and 7.

Logic Output Optoisolators Feature Summary

• Integrated high-gain photodetector with GaAsP LED for efficient signal transmission
• Built-in 20kΩ output pull-up resistor accessible via pin connection
• Schottky-clamped open-collector output structure for robust switching
• Minimized propagation delay difference to reduce switch dead-time

Logic Output Optoisolators Applications

• Isolated IGBT and MOSFET gate drive circuits
• Smart Power Module (IPM) interfaces
• AC and brushless DC motor drivers
• Industrial inverters and power supplies

Logic Output Optoisolators Procurement Notes

Verify the specific suffix #060 against the official datasheet to confirm packaging type and insulation voltage rating. Ensure the component meets required safety certifications such as UL, CSA, or VDE for your application. Confirm that the operating temperature range and isolation voltage specifications align with your system's environmental and electrical stress requirements before procurement.

Logic Output Optoisolators Selection Notes

Select this component when high-speed digital isolation is required for power electronics. The integrated pull-up resistor simplifies PCB layout by eliminating external components. Its low propagation delay makes it suitable for applications where precise timing and minimal dead-time are critical. Ensure the input current does not exceed the maximum rated forward current to maintain longevity and performance.

Logic Output Optoisolators Part Context

This part belongs to the Broadcom HCPL series of logic output optocouplers. It is designed specifically for industrial and automotive power conversion applications. The series offers various insulation voltage ratings and packaging options. The HCPL-4506 variant utilizes a GaAsP LED, distinguishing it from AlGaAs variants like the HCPL-J456.

Logic Output Optoisolators Replacement Considerations

Check for direct substitutes such as HCPL-4506#000E or HCPL-4506#300E if different packaging or reel options are needed. Verify compatibility with HCPL-J456 if AlGaAs LED technology is acceptable. Ensure any replacement maintains the same 8-pin PDIP footprint and electrical characteristics.