HCPL-4562-000E

$3.18

Description：OPTOISO 3.75KV TRANS W/BASE 8DIP
Series：-
Mfr：Broadcom Limited
Package：Tube

SKU:eac8f6f39b2f Category: Transistor, Photovoltaic Output Optoisolators Brand: Broadcom Limited

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

HCPL-4562-000E is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Broadcom Limited. Its product description is OPTOISO 3.75KV TRANS W/BASE 8DIP. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for HCPL-4562-000E

Description：OPTOISO 3.75KV TRANS W/BASE 8DIP
Series：-
Mfr：Broadcom Limited
Package：Tube
Number of Channels：1
Voltage - Isolation：3750Vrms
Current Transfer Ratio (Min)：-
Current Transfer Ratio (Max)：-
Turn On / Turn Off Time (Typ)：-
Rise / Fall Time (Typ)：-
Input Type：DC
Output Type：Transistor with Base
Voltage - Output (Max)：20V
Current - Output / Channel：8mA
Voltage - Forward (Vf) (Typ)：1.3V
Current - DC Forward (If) (Max)：12 mA
Vce Saturation (Max)：-
Operating Temperature：-40°C ~ 85°C
Mounting Type：Through Hole
Package / Case：8-DIP (0.300", 7.62mm)
Supplier Device Package：8-DIP

Transistor, Photovoltaic Output Optoisolators datasheet and documents for HCPL-4562-000E

HCPL-4562-000E

Transistor, Photovoltaic Output Optoisolators Overview

The HCPL-4562-000E is a single-channel high-speed optocoupler from the Broadcom HCPL series, housed in an 8-pin DIP package. It features DC input and transistor output with a maximum forward voltage of 1.6V and a maximum input current of 12mA. The device provides an isolation voltage of 3750Vrms and operates within a temperature range of -40°C to 85°C. It exhibits a current transfer ratio of 45% and holds UL 1577, IEC/EN/DIN EN 60747-5-2, and CSA certifications.

Transistor, Photovoltaic Output Optoisolators Feature Summary

Provides wide bandwidth isolation suitable for analogue signals
Designed for high-speed video signal transmission applications

Transistor, Photovoltaic Output Optoisolators Applications

High performance analog optocoupler circuits
Optically coupled regenerative RF audio receivers
Video signal isolation systems

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix '000E' against datasheets to confirm pinout and packaging details. Ensure compliance with required insulation standards such as UL 1577 or IEC/EN/DIN EN 60747-5-2 for your design. Confirm that the 3750Vrms isolation rating meets safety requirements. Check operating temperature limits against environmental conditions.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when high bandwidth isolation for analogue or video signals is required. It is suitable for designs needing optical isolation between tuning controls and receiver circuits. Verify that the 12mA maximum input current and 45% current transfer ratio align with system drive capabilities and signal integrity needs.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the Broadcom HCPL series of optocouplers. It is specifically engineered for high-speed applications where wide bandwidth isolation is critical. The device integrates an infrared LED emitter with a phototransistor detector in a standard DIP package.