HCPL-M454-560E

$1.22

Description：OPTOISOLTR 3.75KV 1CH TRANS 5-SO
Series：-
Mfr：Broadcom Limited
Package：Tape & Reel (TR)

SKU:338897360ed8 Category: Transistor, Photovoltaic Output Optoisolators Brand: Broadcom Limited

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

HCPL-M454-560E is listed in the Transistor, Photovoltaic Output Optoisolators range at ChipApex. The manufacturer field lists Broadcom Limited. Its product description is OPTOISOLTR 3.75KV 1CH TRANS 5-SO. Review the specifications below when checking this part for your BOM.

Transistor, Photovoltaic Output Optoisolators specifications for HCPL-M454-560E

Description：OPTOISOLTR 3.75KV 1CH TRANS 5-SO
Series：-
Mfr：Broadcom Limited
Package：Tape & Reel (TR)
Number of Channels：1
Voltage - Isolation：3750Vrms
Current Transfer Ratio (Min)：25% @ 16mA
Current Transfer Ratio (Max)：60% @ 16mA
Turn On / Turn Off Time (Typ)：200ns, 300ns
Rise / Fall Time (Typ)：-
Input Type：DC
Output Type：Transistor
Voltage - Output (Max)：20V
Current - Output / Channel：8mA
Voltage - Forward (Vf) (Typ)：1.5V
Current - DC Forward (If) (Max)：25 mA
Vce Saturation (Max)：-
Operating Temperature：-55°C ~ 100°C
Mounting Type：Surface Mount
Package / Case：6-SOIC (0.173", 4.40mm Width), 5 Leads
Supplier Device Package：5-SO

Transistor, Photovoltaic Output Optoisolators datasheet and documents for HCPL-M454-560E

HCPL-M454-560E

Transistor, Photovoltaic Output Optoisolators Overview

The HCPL-M454-560E is a single-channel high-speed optocoupler manufactured by Broadcom Limited. It features a phototransistor output and operates with a data rate of 1 Mb/s. The device provides an isolation voltage of 3750 Vrms and utilizes a 5-SOIC surface-mount package. Key electrical parameters include a forward current of 25 mA, a forward voltage of 1.5 V, and a reverse voltage rating of 5 V. The unit exhibits a current transfer ratio of 65% and supports a maximum collector output current of 8 mA.

Transistor, Photovoltaic Output Optoisolators Feature Summary

High common-mode rejection capability for noise immunity
Guaranteed propagation delay difference for precise timing
Short propagation delays suitable for fast switching applications

Transistor, Photovoltaic Output Optoisolators Applications

IPM inverter dead time control
Industrial automation systems
Motor control circuits
Frequency drive timing synchronization

Transistor, Photovoltaic Output Optoisolators Procurement Notes

Verify the specific suffix '560E' to confirm lead-free RoHS compliance status as indicated by manufacturer documentation. Confirm the 5-pin SOIC package type matches the target PCB footprint. Ensure the 1 Mb/s data rate meets system requirements. Validate that the 3750 Vrms isolation rating satisfies safety standards for the intended application environment.

Transistor, Photovoltaic Output Optoisolators Selection Notes

Select this component when short propagation delays and guaranteed delay matching are critical for signal integrity. The 5-pin form factor offers space efficiency compared to standard 8-pin variants. Consider the 65% CTR for driving subsequent logic stages directly. Verify thermal dissipation limits within the 100 mW power constraint during continuous operation.

Transistor, Photovoltaic Output Optoisolators Part Context

This part belongs to the HCPL-M454 series of high-speed transistor output optocouplers. It is designed to replace older discrete isolation solutions with integrated performance. The series is characterized by enhanced CMR and reduced propagation delays compared to standard general-purpose optocouplers.