HI1-5047A-5

$4.13

Description：IC SWITCH 4PSTX1 45OHM 16CERDIP
Series：-

SKU:c23d181acba6 Category: Analog Switches, Multiplexers, Demultiplexers Brand: Harris Corporation

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

HI1-5047A-5 is listed in the Analog Switches, Multiplexers, Demultiplexers range at ChipApex. The manufacturer field lists Harris Corporation. Its product description is IC SWITCH 4PSTX1 45OHM 16CERDIP. Review the specifications below when checking this part for your BOM.

Analog Switches, Multiplexers, Demultiplexers specifications for HI1-5047A-5

Description：IC SWITCH 4PSTX1 45OHM 16CERDIP
Series：-
Mfr：Harris Corporation
Package：Bulk
Switch Circuit：4PST
Multiplexer/Demultiplexer Circuit：1:01
On-State Resistance (Max)：45Ohm
Channel-to-Channel Matching (ΔRon)：1Ohm
Voltage - Supply, Single (V+)：15V
Voltage - Supply, Dual (V±)：±15V
Switch Time (Ton, Toff) (Max)：500ns, 500ns
-3db Bandwidth：-
Charge Injection：-
Channel Capacitance (CS(off), CD(off))：11pF, 11pF
Current - Leakage (IS(off)) (Max)：2nA
Crosstalk：-88dB @ 100kHz
Operating Temperature：0°C ~ 75°C
Mounting Type：Through Hole
Package / Case：16-CDIP (0.300", 7.62mm)
Supplier Device Package：16-CERDIP
Number of Circuits：1
Grade：-
Qualification：-

Analog Switches, Multiplexers, Demultiplexers datasheet and documents for HI1-5047A-5

HI1-5047A-5

Analog Switches, Multiplexers, Demultiplexers Overview

The HI1-5047A-5 is a dual single-pole single-throw (SPST) analog switch manufactured by Harris Corporation. It utilizes CMOS technology and is housed in a 16-pin ceramic dual in-line package (CDIP). The device operates with a nominal supply voltage of ±15 V, supporting signal voltages within the same range. Key electrical specifications include a maximum on-resistance of 25 Ω and a typical off-isolation of 80 dB. The component features dielectric isolation to ensure latch-free operation and provides break-before-make switching timing. It is designed for commercial extended temperature applications.

Analog Switches, Multiplexers, Demultiplexers Feature Summary

Dielectric isolation processing ensures latch-free operation with low leakage currents
Break-before-make switching prevents signal shorting during channel transitions
Compatible with TTL and CMOS logic families for versatile interface control

Analog Switches, Multiplexers, Demultiplexers Applications

Signal routing in data acquisition systems
Multiplexing audio and video signals
Test and measurement equipment signal paths

Analog Switches, Multiplexers, Demultiplexers Procurement Notes

Verify the manufacturer origin as Harris Corporation or its successors such as Intersil or Renesas. Confirm the package type is CDIP16 and check for RoHS compliance status, as older Harris components may not meet current environmental standards. Ensure the specific suffix matches the required performance grade.

Analog Switches, Multiplexers, Demultiplexers Selection Notes

Select this component when high isolation and low on-resistance are required for analog signal switching. Verify that the system supports ±15 V supplies. Consider the thermal characteristics if operating near the upper temperature limits. Compare against the HI1-5047 series for pin-compatible alternatives with similar electrical profiles.

Analog Switches, Multiplexers, Demultiplexers Part Context

This part belongs to the HI-5040 through HI-5051 family of analog switches from Harris Corporation. These devices share common architectural features including CMOS construction and dielectric isolation. The HI1-5047A-5 specifically offers dual SPST functionality within a single package, distinguishing it from single-channel variants in the same series.