ISL9012IRBJZ-T

Description：IC REG LINEAR 1.5V/2.8V 10DFN
Series：-
Mfr：Renesas Electronics Corporation
Package：Tape & Reel (TR),Cut Tape (CT)

SKU:f474464e3718 Category: Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Brand: Renesas Electronics Corporation

Consult the customer manager about the wholesale price.

consultation hotline：86-132-6715-2157

email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.

Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.

Product introduction

ISL9012IRBJZ-T is listed in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators range at ChipApex. The manufacturer field lists Renesas Electronics Corporation. Its product description is IC REG LINEAR 1.5V/2.8V 10DFN. Review the specifications below when checking this part for your BOM.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators specifications for ISL9012IRBJZ-T

Description：IC REG LINEAR 1.5V/2.8V 10DFN
Series：-
Mfr：Renesas Electronics Corporation
Package：Tape & Reel (TR),Cut Tape (CT)
Output Configuration：Positive
Output Type：Fixed
Number of Regulators：2
Voltage - Input (Max)：6.5V
Voltage - Output (Min/Fixed)：1.5V, 2.8V
Voltage - Output (Max)：-
Voltage Dropout (Max)：-, 0.4V @ 300mA
Current - Output：150mA, 300mA
Current - Quiescent (Iq)：40 µA
Current - Supply (Max)：60 µA
PSRR：-
Control Features：Enable
Protection Features：Over Current, Over Temperature, Soft Start, Under Voltage Lockout (UVLO)
Operating Temperature：-40°C ~ 85°C
Mounting Type：Surface Mount
Package / Case：10-VFDFN Exposed Pad
Supplier Device Package：10-DFN (3x3)
Grade：-
Qualification：-

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators datasheet and documents for ISL9012IRBJZ-T

ISL9012IRBJZ-T

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Overview

The ISL9012IRBJZ-T is a dual low-dropout linear regulator in a 10-lead 3x3mm DFN package. It provides two independent positive fixed outputs: VO1 at 3.3V with a maximum current of 150mA, and VO2 at 3.3V with a maximum current of 300mA. The device operates within an input voltage range of 2.3V to 6.5V and maintains a typical quiescent current of 45µA when both channels are active. It features high power supply rejection ratio (70dB at 1kHz), low output noise (30µVrms), and integrated protection including thermal shutdown, current limiting, and a programmable Power-On Reset for the VO2 channel.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Feature Summary

Integrates two independent LDOs with separate enable pins for individual control
Includes a Power-On Reset function for VO2 with externally adjustable delay timing
Provides soft-start capability to limit input current surge during startup
Features extremely low standby current consumption in shutdown mode

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Applications

Portable instruments and handheld devices
Cell phones and smart phones
MP3 players and PDAs

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Procurement Notes

Verify component authenticity through authorized Renesas or Intersil distributors. Confirm the datasheet revision FN9220.4 matches your design requirements. Ensure proper handling procedures are followed due to electrostatic discharge sensitivity. Validate that the 10-lead DFN footprint aligns with your PCB layout specifications before finalizing procurement.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Selection Notes

Select this component when dual isolated rails are required from a single input source. The ISL9012 is suitable for applications demanding low noise and high PSRR. Verify that the load currents do not exceed 150mA for Channel 1 and 300mA for Channel 2. Ensure the input voltage remains between 2.3V and 6.5V for optimal regulation performance across the specified temperature range.

Voltage Regulators - Linear, Low Drop Out (LDO) Regulators Part Context

This part belongs to the ISL9012 series of dual LDO regulators manufactured by Renesas Electronics Corporation, formerly Intersil. The series is designed for portable electronics requiring efficient power management. The IRBJZ-T suffix indicates a specific output voltage combination packaged in tape and reel format for automated assembly processes.